User Manual

GB
10
Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
When you purchase the Micro component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1 Switch the system on by pressing On/Standby.
2 Press Timer/Clock twice.
Result: CLOCK is displayed.
3 Press Program/Set.
Result: The hour flashes.
4 To... Press...
Increase the hours ö
Decrease the hours õ
5 When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
To... Press...
Increase the minutes ö
Decrease the minutes õ
7 When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
You can play 12 cm or 8 cm compact discs without an adapter.
This unit has been designed to playback the CDs: Audio CD, CD
Text, CD-R and CD-RW.
Continued use of irregular shape CDs (heart-shape, octagonal,
etc.) can damage the unit.
1 Select the CD function by pressing FUNC. button.
2 Press the Open/Close ( ) button on the front panel.
Result
: The compartment opens.
3 Place your disc in the compartment, with the label on the disc
facing upwards.
4 Close the compartment by pressing the Open/Close ()
button again.
Result: The display indicates the number of tracks
on the disc.
5 Press the PLAY/PAUSE (ˆ¨) button.
Result: The first track on the disc plays and the track
number is displayed.
6 To stop playback temporarily, press the PLAY/PAUSE (ˆ¨)
button.
Press PLAY/PAUSE (ˆ¨) again to continue playing
the disc.
7 Press the STOP (■) button when you have finished.
Setting the Clock Listening to a Compact Disc
On/Standby
Sleep
CD/TAPE/MP3
Mono/ST.
Band Function
Tape
Mode
Program/
Set
Repeat
Timer
on/off
Timer/
Clock
Preset
EQ
Power
Sound
Mute
VOL.
VOL.
Tuning
Mode
2
1
7
4
4
6
6
35
CD/TAPE/MP3
Band Function
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
CD Repeat
Repeat A B
Preset EQ +10 (CD)
Record
Start/Stop
Band
PROG./Set
CD Synchro
CD Door Open/Close
7
1
7
56
56
When playing a CD-R or CD-RW
User-edited CD-Rs (Recordable) and CD-RWs (Rewritable)
can be played back only if they are already “finalized”.
◆ You can play back your original CD-Rs or CD-RWs recorded
in music CD format. (However, they may not be played back
depending on their characteristics or recording conditions.)
◆ Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
◆ CD-RWs may require a longer readout time. (This is caused
by the fact that the reflectance of CD-RWs is lower than for
regular CDs.)
24
MM-L5000-NO RDS(GB) 5/19/03 19:15 Page 10