User Manual

GB
12
You can check and change your selection of tracks at any time.
You must have selected at least one track.
1 Press STOP ( ■ ) once if you have started listening to the
selection.
2 Press Program/Set.
Each time you press Program/Set, the next selection
is displayed.
3 Press Program/Set one or more times until the track to be
changed is displayed.
4 Press SKIP I or I to select the new track.
5 Press CD (ˆ¨) to start listening to the selection.
Result: The first track selected is played.
You can change one or more tracks in your initial selection.
You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1 Switch the system on by pressing On/Standby.
2 Select the TUNER function by pressing FUNC. button.
3 Select the required frequency band by pressing Band button.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
SW1,SW2 Short Wave
4 To search for a Press Tuning Mode button
station... on the front panel....
Manually One or more times until MANUAL is displayed.
Automatically One or more times until AUTO is displayed .
5 Select the station to be stored by:
Pressing Tuning õ or ö on the front panel
or
Pressing Tuning õ or ö on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Tuning õ or ö buttons.
The automatic search procedure may stop on a frequency
that does not correspond to a radio station. If this happens,
use the manual search mode.
Checking and Changing Programmed Tracks Searching for and Storing the Radio Stations
On/Standby
Sleep
CD/TAPE/MP3
Mono/ST.
Band Function
Tape
Mode
Program/
Set
Repeat
Timer
on/off
Timer/
Clock
Preset
EQ
Power
Sound
Mute
VOL.
VOL.
Tuning
Mode
23
5
1
4
4
Volume
FUNC.
CD/TAPE/TUNING
R
Tuning Mode
CD Repeat
Repeat A B
Preset EQ +10 (CD)
Record
Start/Stop
Band
PROG./Set
CD Synchro
Band
2
3
1
5
4
5
MM-L5000-NO RDS(GB) 5/19/03 19:15 Page 12