User Manual

English 5
Installation
STEP 4
Duct Base
1. Place oven on the Duct Base.
2. Tight 2 screws together on the
back side with Duct base by using
provided SCREW C. (2 EA)
3. Tight 2 screws together on the
right side with Duct base by using
provided SCREW C. (2 EA)
4. Tight 2 screws together on the
Install hook by using provided
SCREW A. (2 EA)
NOTE
You may not be assembled when using
the thicker Drill bit.
STEP 3
5. Remove 4 screws from the lower
right and left side of outer panel.
MA-TK8020_AA_II_DE68-04476A-02_EN.indd 5 2018-01-19  11:23:37