Instruction Manual
8
Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has been
an interruption in power, the display shows “ ” At this point, you can
select the weight system for the display. You can choose between pounds
(LBS) or kilograms (KG). To do so,
1 Press 0 immediately after plugging in your microwave. The display will
show:
If the display does not shows “Kg”, you will need to unplug the
microwave and then plug it in again in order to change to the weight
selection.
2 Press 0 repeatedly to select the weight system you wish to use:
When you have selected the weight system you want to use, press the
PAUSE/CANCEL button to end this procedure.
Setting the Clock
1 Press the Clock button. The “ENTER” and “TIME” indicators flash.
2 Use the number buttons to enter the current time. You must press
at least three numbers to set the clock. If the current time is 5:00
enter, 5,0,0.
3 When 5 seconds has elapsed, “ENTER” indicator flash and “Cloc”
will be displayed.
4 Press Clock again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by pressing
the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have
entered. It also allows you to pause the oven’s cooking cycle, so that you
can check the food.
• To pause the oven during cooking: press
Pause/Cancel once. To
restart, press
Start.
• To stop cooking, erase instructions, and return the oven display to the
time of day: press
Pause/Cancel twice.
• To correct a mistake you have just entered: press
Pause/Cancel once,
then re-enter the instructions.
Using the One Minute + Button
This button offers a convenient way to heat food in one minute increments at
the High power level.
1 Press the One Minute+ button once for each minute you wish to cook
the food. For example, press it twice for two minutes. The time will
display, and the oven starts automatically.
Add minutes to a program in progress by pressing the One Minute+
button for each minute you want to add.
Using the Sensor Cook Buttons
By actually sensing the steam that escapes as food heat, this feature automati-
cally adjusts the oven’s heating time for various types and amounts of precooked
food. All food should be precooked and at refrigerator temperature.
1 Press the Sensor Cook button corresponding to the food you are
cooking (
Popcorn, for example). The display shows “ ” and your
microwave oven will begin cooking automatically.
When cooking popcorn, wait at least five minutes between each bag to avoid
overheating the glass tray. If you want to check the current time while cook-
ing is in progress, press the
Clock button.
Sensor Cooking Guide
• Follow the instructions below when sensor cooking different types of food.
kg g oz
Lbs
cup
.
Food Amount Procedure
Potatoes
1 to 6 EA.
(
MS840WB/BB/SB/
CB, MS1040WB/
BB/SB/CB
:
1 to 4 EA.)
Prick each potato several times with fork.
Place on turntable in spoke-like fashion. Let
stand 3-5 min. Let oven cool for at least 5
minutes before using again.
Fresh
Vegetables
1 to 4 cups Place fresh vegetables in microwave-safe dish
and add 2 Tbsp of water. Cover with
microwave safe plastic wrap or lid. (
MS1240WB/
BB/SB/CB
, MS1440WB/BB/SB/CB ; Using the
glass cover gives the best results.)
If using plastic wrap be sure to leave a small
opening near the edge of dish for ventilation.
Remove vegetable from oven let sit covered
for 2 minutes, stir or serve. Let oven cool for at
least 5 minutes before using again.
Single
Entrees
8 to 14 oz. Remove food from outer wrapping and follow
box instructions for covering and standing. Let
oven cool for at least 5 minutes before using
again.
Popcorn
3.0 ~ 3.5 oz
1 package
Use only one microwave-only bag of popcorn
at a time. Use caution when removing and
opening hot bag from oven. Let oven cool for
at least 5 minutes before using again.