User Manual

Basic Setup 1-8
Setup 1-8
Basic Setup 1-9
Setup 1-9
1. TV with only one input. Input is used.
If a device, such as a DVD player or VCR is connected to your TV:
1 Unplug the device from the TV and plug it into the appropriate connectors marked IN on your
MovieBeam receiver.
2. Connect the A/V (and S-video) cables from the MovieBeam receiver’s “OUT” connectors to the
TV’s “IN” connectors as shown below. (Using the S-video cable is recommended.)
OUT
IN
TV
MovieBeam
receiver
R AUDIO LS-VIDEO
Input #1
VIDEO
DVD/VCR
or other device
 
