User Manual

Basic Setup 1-10
Setup 1-10
Basic Setup 1-11
Setup 1-11
3. Television with several inputs. All inputs are used.
If your TV has more than one set of inputs and they are all used:
1. Unplug one device from the TV and plug it into the appropriate connectors marked IN on your
MovieBeam receiver. The other end should be plugged into the connectors marked OUT on
the device.
2. Connect the A/V (and S-video cables) from the MovieBeam receiver’s “OUT” connectors to the
TV’s “IN” connectors as shown below. (Using the S-video cable is recommended.)
DVD
or other device
 

OUT
IN
TV
R AUDIO LS-VIDEO
Input #2
Input #1
VIDEO
VCR
or other device
 

MovieBeam
receiver