User Manual

Setup Details 2-3
Connecting power
Plug the power cord into a wall outlet and the other end into the MovieBeam receiver’s power
connector. You should always keep the receiver plugged in so it can receive movies. If the
MovieBeam receiver is connected to a power outlet controlled by a wall switch, be sure the
switch remains in the “on” position. If power is connected via a power strip, do not turn the
power strip off.
Electrical precautions
Place the power cord where it will not be walked on and where it is not accessible to children
or pets. When disconnecting the power cord, pull on the pug, not the cord.









 