User Manual
Table Of Contents
- Introduction
- Getting Started
- Using X5
- Caution
- Back Up Important Data
- Safeguard User Password
- Connect to Certified Devices; Compliance with Safety Standards
- Avoid Shock, Vibration
- Do Not Disassemble, Damage, or Remove Label
- Use Genuine Accessories
- Use in Appropriate Temperature and Humidity
- Use No Excessive Force in Unplugging the Cable
- Perform Virus Scans and Updates
- Clean the Product
- Keep Away from Children, Infants and Animals
- Product Specifications and Certifications
5
Using X5
Connecting X5
Select the cable compatible with your device. Connect one end of the cable to the
device and the other end to the X5.
When using the Thunderbolt 3 storages (X5) for the first time in the Windows OS, you
need to “Approve” Thunderbolt 3 devices. Select “Always Connect” then “OK”.
Disconnecting X5
Be sure to use Safely Remove Hardware feature for every disconnection of X5.
Unplugging from computer without performing Safely Remove Hardware feature
may cause data losses or damages to the X5.
* Samsung shall not be liable for loss of user data or product damages caused by user’s failure to
comply with this instruction.
How to Safely Removing Hardware under each OS
Computer OS Description
Windows OS
Once Safely Remove Hardware is selected from the tray, select the
device you wish to remove and click Eject. Once the device is removed
safely, you will be notified by the OS.
Mac OS
Right-click on the T5 icon, and select Eject or drag the icon to the Trash to
safely remove the product. Remove the cable after the activity indicator
LED on the product turns red and then turns off.