Samsung Portable SSD T7 Touch User Manual MU-PC500 MU-PC1T0 MU-PC2T0 1
DISCLAIMER SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. Information in this document is provided in connection with products of Samsung Electronics Co. Ltd. (“Samsung”). Product descriptions and specifications contained in this document are for reference purposes only. All information discussed in this document may change at any time, without notice, and is provided on an “AS IS” basis, without warranties of any kind.
Samsung Portable SSD T7 Touch User Manual Table of Contents Introduction ..................................................................................................................... 4 Getting Started ................................................................................................................. 5 What’s In the Box ...........................................................................................................................................
Introduction Samsung T7 Touch is a superfast external storage device that has convenient data protection with fingerprint recognition and a refined design with motion LED. Transfer in a flash Transfer massive files within seconds with the incredible speed of USB 3.2 Gen2 on the T7 Touch. The embedded PCIe NVMe technology facilitates sequential read/write speeds of up to 1,050/1,000 MB/s, respectively. Built strong and safe SSD stands for Solid State Drive, which means it’s built with no moving parts.
Getting Started Before using the Samsung Portable SSD T7 Touch (referred to as “T7 Touch”), please read this User Manual thoroughly so that you may know how to use the product in a safe and appropriate manner. What’s In the Box • Samsung Portable SSD T7 Touch • USB 3.2 Gen 2 USB C to A cable • USB 3.
System Requirements 1. USB 3.2 Gen 2 (10 Gbps) Interface Support USB (Universal Serial Bus) is a serial input/output interface standard for connecting various devices. T7 Touch’s data transfer speed is optimal with USB 3.2 Gen 2 (10 Gbps) and using lower versions such as USB 3.2 Gen 1 (5Gbps), USB 2.0 and 1.1 may result in lower performances due to interface limitations inherent in such lower versions. * Performance may vary depending on user’s system to which T7 Touch is connected. Even when using USB 3.
Using T7 Touch Connecting T7 Touch Select the cable compatible with your device. Connect one end of the cable to the device and the other end to the T7 Touch. Disconnecting T7 Touch Be sure to use Safely Remove Hardware feature for every disconnection of T7 Touch. Unplugging from computer without performing Safely Remove Hardware feature may cause data losses or damages to the T7 Touch.
1. Running Samsung Portable SSD Software 1.0 Select “Samsung Portable SSD Software 1.0” application icon on Desktop. * In case of Mac OS, Samsung Portable SSD Software 1.0 may not operate without device (driver) enabled. 2. Setting Security Mode (Optional) Security mode is optional. You may use T7 Touch without security/update feature enabled. Please follow the instructions that appear on each screen of the Samsung Portable SSD Software 1.0.
• Security with Password and Fingerprint You may enable security mode with password and fingerprint. After you set up password, you can use fingerprint security. If the password is forgotten, you need to unlock T7 Touch with fingerprint, move all the stored data to safe place and need to have T7 Touch to be restored to factory setting through online service rendered by our customer service centers.
3. Unlock If you’ve enabled security mode, every time you connect T7 Touch to your computer you need to tap your fingerprint or enter your password and click the “UNLOCK” button before getting access to the data in T7 Touch. If you fail to unlock, your access will be confined to capacity of about 128MB allocated to SamsungPortableSSD_1.0.exe and SamsungPortableSSD_1.0.app, which means that you will be locked out of the data protected. * Depending on the user environment, the “SamsungPortableSSD Software 1.
* You may choose another Samsung Portable SSD by clicking T7 Touch’s name on left panel. Samsung Portable SSD Software lists the entire host devices (up to 6) to which Samsung Portable SSD is connected. 4. Change in Settings You can change your security mode/user name/password/fingerprint security settings of the T7 Touch by clicking “SETTINGS” button on the main page. When using a computer without the security software, you can download installation file (“SamsungPortableSSD_Setup_Win_1.0.
• Name/Password You can change Name and Password. For changing password, please click “CHANGE” button.
• Fingerprint security settings If you’ve enabled fingerprint security mode, you can manage fingerprint settings by clicking “EDIT” button ( ). Enter the current password and click “CONFIRM” button ( fingerprint management step. By clicking “ADD FINGERPRINT” button ( ) to move to the ), you can add fingerprints.
Place your finger on the sensor.
When registering a fingerprint, the first Fingerprint 1 to 4 is created. You can rename ( ) or delete ( ) the registered fingerprint.
5. Update Software and Product firmware If your computer is connected to the internet, the number of Software/Firmware updates available will show on the bottom of left panel. By clicking “UPDATE” button ( By clicking “UPDATE” button ( firmware (“FW”) and update it. ), you may go to update page.
* When user changes “Check for Update Automatically” from OFF to ON, SW does not refresh update information immediately. Update information is refreshed when either user clicks refresh button or Samsung Portable SSD is connected to the computer. * For FW updates, security mode needs to be OFF. Any access to T7 Touch, including copying/deleting /formatting partition, while FW is being updated, may cause abnormal behavior of or damage to the T7 Touch.
For Android devices 1. Download Application from Google Play Store You may download “Samsung Portable SSD 1.0” application from App store. 2. Running the Application Please run the Application installed. 3. Setting Security Mode Password and fingerprint stored in T7 Touch after connection on the computer can also be used in Android. * Samsung shall not be liable for loss of user data caused by forgotten or stolen passwords.
4. Unlock T7 Touch If you’ve enabled security mode, every time you connect T7 Touch to your device, you need to tap your fingerprint or enter your password and press the “UNLOCK” button before getting access to the data in T7 Touch.
5. Home Screen If security mode is not enabled in your T7 Touch, you can enter to Setting screen by clicking one of the two areas. 6. Settings Screen You can change the user name of T5 or password, fingerprint security settings and turn ON/OFF security mode.
7. Update SW and FW To enter the update screen, click the Update page button ( ) on Home screen. If any update is available, the “UPDATE” button ( ) will be highlighted. If there is an application to be updated, your clicking UPDATE button will show the link to ‘App store’. * Firmware update requires connection to computer. 8. Deleting “Samsung Portable SSD” Application on Android Open your android device’s Settings app and tap Apps or Application manager. Tap “Samsung Portable SSD” and uninstall. 9.
Caution Failure to follow the instructions and cautions in each section of this manual may result in injury, damage to the product or data loss. Please read thoroughly before using the product. Back Up Important Data No computer system can be absolutely secure. Samsung does not provide any kind of guarantee and/or warranty against data loss on the T7 Touch under any circumstances.
Use Genuine Accessories Always use genuine parts and accessories certified by Samsung. Samsung shall not be liable for damages to the product or loss of user data caused by use of non-genuine parts or accessories. Use in Appropriate Temperature and Humidity Use the product in appropriate environment: temperature between 5°C - 35°C and humidity between 10 - 80%. Use No Excessive Force in Unplugging the Cable Do not pull or unplug the cable using excessive force.
FAQ The Samsung Portable SSD Software 1.0 can only run on certain OS versions (or newer). I cannot run the Samsung Portable SSD Software 1.0. Please see below for supported OS versions: Windows OS: Windows 7 or higher Mac OS: Mac OS X 10.10 or higher The “USB storage unexpectedly removed” message appears on the status bar of my mobile device. In order to use the Samsung Portable SSD Software 1.0, permission to access the USB device is required.
Product Specifications and Certifications Product Specifications Model MU-PC500 MU-PC1T0 MU-PC2T0 Capacity 500GB 1TB 2TB Interface USB 3.2 Gen 2 (10Gbps), backwards compatible Data Transfer Speed* 1,050 MB/s Dimensions 85 x 57 x 8 mm (3.3 x 2.2 x 0.3 inch) (L x W x H) Weight 58 g (2.04 oz.) (2TB) Recommended User’s System Specifications Windows 7 or higher; Mac OS X 10.10 or higher; or Android Lollipop (version 5.
FCC (Federal Communication Commission) United States Federal Communication Commission (FCC) regulations Note that any alteration or modification, not authorized expressively by the party responsible for compliance to regulations, may result in voiding user’s authority to operate the device. This equipment has been tested and verified to comply with FCC CFR Part 15, Restrictions on Class B Digital Devices.
WEEE (Waste Electrical and Electronic Equipment) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
