Product specifications
Samsung Electronics 4-4
4-3 Setting Option Setup Method
In order to set the indoor unit option code using the wired remote con-
troller, hold down the
and buttons at the same time for 5
seconds.
Page No.
Option code
t
Option code will not be applied if you don’t press the button.
t
Setting indoor unit option code is only possible in Master wired remote controller.
You can only check the indoor unit option code in Slave wired remote controller.
t
Setting indoor unit option code is possible when one indoor unit is connected. If more than 2 indoor
units are connected, you can only check the Master indoor unit option code.
1
The menu will display .
Press the
button to enter the indoor unit option code
mode.
2
Press the button to change the page. You can change the
page from 0 to 3.
3
Press the buttons and the button to set the
option code in order.
4
Press the button to save the changed setting.
You will move to the menu selection display.
tThe first digit represents the page number
and the remaining five
digits are option codes.
tThe option code which is currently setting
will flicker.
t Press the button anytime during setup to exit without setting.
Model Option code Model Option code
AC052FBMDEH
011014-19626E-27343C-370010
AC100FBMDEH
011034-15617C-276470-370000
AC052FCADEH
AC100FCADEH
AC071FBMDEH
011017-1563A2-274750-370010
AC100FBMDEH
AC071FCADEH
AC100FCADGH
AC090FBMDEH
011034-15617C-275A64-350000
AC090FCADEH
Setting an indoor unit option code