Wired Remote Controller ENGLISH USER’S MANUAL PORTUGUÊS ITALIANO FRANÇAIS ESPAÑOL MWR-WS00 RUSSIAN EΛΛHNIKA DEUTSCH System Air Conditioner E S F I P D G R A DB98-25179A(1) MWR-WS00_IB_E_25179.
Safety Precautions • Before using the wired remote controller, read carefully these instructions. • After reading the instructions, keep this user's manual in a handy and safe place. If a user is changed, you must hand over the manuals. • Never attempt to install the air conditioning system or to move the wired remote controller by yourself. WARNING Do not attempt to install or repair this wired remote controller by yourself. This remote controller contains no user-serviceable parts.
ENGLISH Contents WIRED REMOTE CONTROLLER ........................................................ GETTING STARTED ........................................................................... SELECTING THE AUTOMATIC OPERATING MODE .......................... SELECTING THE COOLING MODE .................................................... SELECTING THE HEATING MODE .................................................... SELECTING THE DEHUMIDIFYING MODE ........................................
Wired Remote Controller The wired remote controller is installed on the wall. 7-day schedule time setup Schedule clock Operating mode Mode selection Fan speed Indoor temperature Check button Filter reset button Time/schedule reset button Note Press the button after cleaning the air filter. The remote controller will display the filter sign to alert the user to clean the filter and turn off the display when the button is pressed.
ENGLISH Getting Started You have just purchased a wired remote controller and it has been installed by your installation specialist. Your User’s Manual contain much valuable information on using your wired remote controller. Please take the time to read them as they will help you take full advantage of the unit’s features. In the manual, you will find a series of step-by-step procedures for each function available.
Selecting the Automatic Operating Mode The room temperature and the fan speed are controlled automatically in the auto mode. 1 2 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used.
ENGLISH Selecting the Cooling Mode Select the cooling mode to lower the room temperature. 1 2 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used.
Selecting the Heating Mode The heating mode can be selected only on the heat pump models. Select the heating mode to raise the room temperature. 1 2 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used.
ENGLISH Selecting the Dehumidifying Mode Select the dehumidifying mode if the room is too humid. Using this mode will slightly lower the room temperature. 1 2 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used.
Selecting the Fan Mode Select the fan mode to circulate air without changing the temperature. 1 2 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used.
ENGLISH Selecting the Quiet Mode Select the quiet mode to run the indoor unit as quietly as possible. The quiet mode is used with other operating modes such as the cooling and heating modes. 1 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: T he air-conditioner will be turned on with the mode selected when the unit was last used. 2 Select the desired operating mode by pressing the button.
Selecting the Sleep Mode Select the sleep mode to sleep in comfort without worrying to turn off the air-conditioner in the middle of the night. The air-conditioner will turn off automatically after 6 hours. 1 Press the (ON/OFF) button to turn on the indoor unit. (Do not press the (ON/OFF) button if the remote controller is on). Result: 2 Select the desired operating mode by pressing the button. Note 3 T he air-conditioner will be turned on with the mode selected when the unit was last used.
ENGLISH Adjusting the Airflow Direction Adjust the airflow direction to circulate the air according to various needs. By adjusting the airflow direction, the efficiency of the air-conditioner can be increased. Note 1 The airflow direction cannot be set on duct type indoor units. If the indoor unit supports 5-step directions: Press the button: - Select the direction of the airflow. The airflow blade can be set to one of the five directions or to swing automatically.
Checking the Room Temperature 1 Press the button to check the room temperature. Result: T he room temperature will be displayed for 3 seconds and return to set temperature display. Note The room temperature may be slightly different depending on the installation location of the remote controller. E-14 MWR-WS00_IB_E_25179.
ENGLISH Setting the 7-day Schedule Set the 7-day schedule to reserve the on/off timer to be repeated every week. At most 10 schedules may be set for each day. 1 Press the Result: 2 Press the Result: 3 button to set a schedule. The day is set to Monday and the schedule number displays the next empty schedule number for that day. If there are no schedules set, the schedule number displays . If there are 5 schedules set, for example, the schedule number displays .
Setting and canceling a Holiday Schedule Schedules need not be deleted when there’s a holiday. Instead, the holiday can be set to stop the schedule from running for the set holiday while keeping the schedule information. 1 Press the button to enter the schedule setup mode. The button does not need to be pressed if the mode is already in schedule setup mode. 2 Select the day of the schedule to be set as holiday by pressing the button.
ENGLISH Canceling during Schedule Setup You can cancel the schedule setup at any point during setup as long as the button is not pressed. 1 At any point during schedule setup, press the button. Result: The schedule is canceled. Deleting a Schedule Schedules may be deleted one at a time. 1 Press the button to enter the schedule setup mode. The button does not need to be pressed if the mode is already in schedule setup mode. 2 Select the day of the schedule to be deleted by pressing the button.
Resetting the Clock Reset the clock to change the time if needed. 1 Press the Result: 2 button shortly. The clock starts blinking. Set the time by pressing the the button. Result: button and Each time the button is pressed, the time is increased by 1 hour. Each time the button is pressed, the time is increased by 1 minute. Hold down the button to increase the time by 10minutes. Set the day by pressing the 3 Press the Result: button. button.
ENGLISH Initializing the Remote controller The remote controller can be initialized to the default factory settings. 1 Press the button for 5 seconds. Result: T he clock is initialized and all the schedules are deleted. Note Initializing the remote controller will delete all the schedules and will reset the clock. Do not initialize the remote controller unless you want all the schedules to be deleted.
Setting the Auto Stop Function The wired remote controller can be set to turn off the indoor unit(s) after a set period of time has passed since any button on the remote controller was last pressed. This function is used to turn off the indoor unit in case the user forgets to turn off the indoor unit. 1 Press the mode. Result: button for 5 seconds to enter the setup The wired remote controller will enter the setup mode and the menu will dispaly . 2 Press the mode. 3 The default time setting is .
ENGLISH Setting the temperature limits The wired remote controller can be set to allow only a certain temperature range. By setting the lower and upper temperature limits, the set temperature can be selected only within the set range. This function may be used for energy savings. 1 Press the mode. Result: 2 button for 5 seconds to enter the setup The wired remote controller will enter the setup mode and the menu will dispaly . Press the Result: button.
MWR-WS00_IB_E_25179.
