User manual

12 English
English 12
English 13
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the POWER ( )
button.
2. Press the TIMER SET button until TIME is displayed.
3. Press the ENTER ( ) button.
Result: ON is displayed for a few seconds. You can
set the timer switch-on time.
4. Set the timer switch-on time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to
set the minutes.
d Press the ENTER ( ) button.
Result: OFF is displayed for a few seconds. You can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER ( ) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set
the minutes.
d Press the ENTER ( ) button.
Result: VOL XX is displayed, where XX corre-
sponds to the volume already set.
6. Press th e TUNING/ALBUM , or . button to adjust
the volume level, and then press the ENTER ( )
button.
Result: The source to be selected is displayed.
7. Press th e TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
You must also ...
FM/AM (radio)
a Press the ENTER ( ) button.
b Select a preset station by pressing
the TUNING/ALBUM , or .
button.
CD/MP3 (compact disc) Load one compact disc.
USB Connect the USB device.
8. Press the ENTER ( ) button.
Result: CHKREC (Do you want to record?) is displayed.
Timer Function
Setting the Clock
During each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press the
ENTER ( ) button, "CLOCK" is displayed.
3. Press the ENTER ( ) button. The hour flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER ( ) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
ENTER ( ) button. " TIME" appears in the
display.
•
The current time is now set.
•
You can display the time, even when you are
using another function, by pressing the TIMER
SET button once.
•
You can also use the
]
or
[
on the front
panel instead of the TUNING/ALBUM , or .
button in Steps 3 and 4.
Using the Bluetooth Power On
When the product is turned off, you can connect
your smart device to the product via Bluetooth to
turn it on.
1. Turn on the product, press and hold the CD/
Bluetooth button on the remote control to use the
Bluetooth Power On function.
• Each time you press this button, the Bluetooth Power
mode will change as follows: BLUETOOTH POWER
ON  BLUETOOTH POWER OFF.
• Set the Bluetooth Power mode to BLUETOOTH
POWER ON by pressing this button.
2. Pair your smart device with the product via
Bluetooth. (For information on Bluetooth
connections, refer to your smart device's manual.)
3. When the product is off, and you initiate a Bluetooth
connection with your smart device, the product will
turn itself on automatically in Bluetooth mode.
• Select the desired music to play from your smart device.
• This function is available when the Bluetooth Power
function is set to BLUETOOTH POWER ON.
• In Bluetooth Power On or Off mode, when the CD,
radio, USB or auxiliary source function is selected, if you
connect your smart device to the product via Bluetooth,
the product will automatically change to the Bluetooth
mode.
• The Bluetooth Power mode setting is retained after you
turn the Mini off.