User's Manual

15
•
After you power the phone on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1. While in standby mode, enter a phone number, and press
to place a call.
2. Press to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
• View Now — This selection allows you to view the messages now.
• View Later — This selection allows you to view the messages at a
later date.
Highlight the desired viewing option and then press .
Adjust the Ringer
In standby mode, press the Volume key (on the left side of the
phone) up or down.
1. In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
Options are:
When you are satisfied with the setting, press SET . Your phone
returns to standby mode.
Tip: You can also adjust the ringer by pressing Menu ➔ Settings ➔ Sound
Settings ➔ Volume ➔ Voice Calls . Use the Volume key on the left side of
your phone to adjust the ringer volume setting.
Note: The Silent icon ( ) appears in the display when the phone is in Silent
mode. The Vibrate icon ( ) appears in the display when the phone is
in
Vibrate mode. The Vibrate/Ring icon ( ) appears in the display
when the phone is in Vibrate/High mode.
Call Answer Mode
You can choose to answer a call by pressing any key except
or , by pressing only , or by opening
the phone’s flip. (For more information, refer to “Call Answer” on
page 102.)
Talk Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
• Ringer Off • Medium
•Vibrate •Medium/High
•Low •High
• Low/Medium • Vibrate/High
r460.book Page 15 Thursday, July 2, 2009 10:37 AM