User's Manual

Tools 88
3.
Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
• Up Navigation key — [ x ] Multiplication
• Left Navigation key — [ - ] Subtraction
• OK key — [ = ] Equals/Total
• Right Navigation key — [ + ] Addition
• Down Navigation key — [ ÷ ] Division
4. Use the keypad to enter the second number into your
equation.
5. Press = ( ) to perform the calculation and view the
result.
To perform another calculation, press the Clear soft key.
Stop Watch
You can use this menu to set a stop
watch.
1. From the Tools menu, select
Stop Watch.
2. Press to start, stop, and
resume the stopwatch count.
3. At the start of each succeeding event/lap, press the
Record soft key to record the completion time for the
previous event/lap.
4. Press the Reset soft key to erase all stop watch (lap) times
recorded.
Converter
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
r460.book Page 88 Thursday, July 2, 2009 10:37 AM