Firmware Update User Manual(Firmware Update Utility Manual ver.AXM09B1Q)

Samsung Solid State Drive 9
Firmware Update Manual
Using the DOS Firmware Utility
CAUTION: The following instructions are based on the assumption that a startup disk for
DOS, the Samsung SSD Firmware Update Utility software, and the firmware data file are
correctly installed on the USB Flash Disk.
1. Configure the USB Flash Disk as a primary booting device in the BIOS.
Note: If you are not sure how to set up your computer BIOS, please check the user manual of your
computer system or motherboard.
2. Restart the computer in DOS mode with the USB Boot Disk.
3. Samsung Firmware Update Utility will be launched automatically.
[Figure 9. SSD Firmware Update Utility for DOS]