Manualshelf

Firmware Update User Manual

ManualsBrandsSamsung ManualsComputers & AccessoriesSamsung 960 EVO Series - 250GB PCIe NVMe - M.2 Internal SSD (MZ-V6E250BW)
12345678910
User Manual SAMSUNG PROPRIETARY
Revision3.1
3
Product Overview
System Requirements
The Samsung Firmware Utility is a Linux-based firmware update utility software. Be sure to
check if the following requirements are satisfied before installing and using this product.
Hardware Requirements
1. Samsung SSDs, for example, Samsung SSD 960 EVO Series
2. USB Flash Drive (Minimum 30 MB capacity for boot device)
Software Requirements
1. UNetbootin (freeware) software is required for creating bootable USB.
Precondition
Before entering recovery process, connect the 960 EVO device-to-be repaired as a
secondary device and backup all data. After backup, proceed to following procedure
introduced next step by step.