User Guide
Table Of Contents
- Important safety information
- Overview
- Using the cooktop burners
- Care and cleaning of the cooktop
- Troubleshooting
- Warranty
- Appendix
- Información importante de seguridad
- Descripción general
- Uso de los quemadores de la cubierta
- Cuidado y limpieza de la cubierta
- Superficie de la cubierta
- Superficies de porcelana esmaltada (en algunos modelos)
- Superficies de acero inoxidable (en algunos modelos)
- Perillas de control
- Rejillas y componentes de los quemadores
- Tapas y cabezales de los quemadores
- Bases de los quemadores
- Electrodos
- Rejillas y la rejilla para wok
- Comal de hierro fundido (para NA30K7750T*/NA36K7750T* solamente)
- Reemplazo del cabezal y la tapa de los quemadores
- Tapa de los quemadores
- Resolución de problemas
- Garantía
- Apéndice
- Informations importantes relatives à la sécurité
- Présentation
- Utilisation des brûleurs de la table de cuisson
- Entretien et nettoyage de la table de cuisson
- Surface de la table de cuisson
- Surfaces en émail vitrifié (sur certains modèles)
- Surfaces en acier inoxydable (sur certains modèles)
- Boutons de commande
- Grilles et composants des brûleurs
- Chapeaux et têtes des brûleurs
- Bases des brûleurs
- Électrodes
- Grilles et grille du wok
- Gril en fonte (uniquement pour NA30K7750T*/NA36K7750T*)
- Remplacement des chapeaux et têtes des brûleurs
- Chapeau du brûleur
- Dépannage
- Garantie
- Annexe
English 21
Care and cleaning of the cooktop
Burner caps and heads
NOTES
Before removing the burner caps and heads, remember their size and location.
Replace them in the same location after cleaning.
Wash burner caps and burner heads in hot, soapy water and rinse with clean
running water. You may scour with a plastic scouring pad to remove burned-on
food particles.
Use a sewing needle or twist tie to unclog the small holes in the burner head, if
required.
CAUTION
• Do not wash any burner parts in a dishwasher.
• Do not use steel wool or scouring powders to clean the burners.
Brass burner head
(Only NA30N7755T*/NA36N7755T*)
NOTE
• The brass parts of your burner will change
color with use. However, this will not
affect performance. You can clean the
brass parts with a brass cleaner.
• After cleaning, conrm that the burner
port openings aren't plugged.
Burner bases
CAUTION
The burner bases cannot be removed for cleaning.
Make sure that no water gets into the burner bases and the brass gas orices.
Wipe clean with a damp cloth. Be careful not to scratch, deform, or damage the
bases. Allow them to dry fully before using.
Electrode
Power burner base Round burner base
NA30N6555TG_DG68-01089A-01_EN+MES+CFR.indb 21 5/28/2018 12:47:23 PM