User Manual
Table Of Contents
- Important safety information
- Overview
- Using the cooktop burners
- Care and cleaning of the cooktop
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Información importante de seguridad
- Descripción general
- Uso de los quemadores de la cubierta
- Cuidado y limpieza de la cubierta
- Superficie de la cubierta
- Superficies de porcelana esmaltada (en algunos modelos)
- Superficies de acero inoxidable (en algunos modelos)
- Perillas de control
- Rejillas y componentes de los quemadores
- Tapas y cabezales de los quemadores
- Bases de los quemadores
- Electrodos
- Rejillas y la rejilla para wok
- Comal de hierro fundido
- Reemplazo del cabezal y la tapa de los quemadores
- Tapa de los quemadores
- Resolución de problemas
- Garantía limitada (Estados Unidos)
- Garantía (CANADÁ)
- Apéndice
- Informations importantes relatives à la sécurité
- Présentation
- Utilisation des brûleurs de la table de cuisson
- Entretien et nettoyage de la table de cuisson
- Surface de la table de cuisson
- Surfaces en émail vitrifié (sur certains modèles)
- Surfaces en acier inoxydable (sur certains modèles)
- Boutons de commande
- Grilles et composants des brûleurs
- Chapeaux et têtes des brûleurs
- Bases des brûleurs
- Électrodes
- Grilles et grille du wok
- Gril en fonte
- Remplacement des chapeaux et têtes des brûleurs
- Chapeau du brûleur
- Dépannage
- Garantie (États-Unis)
- Garantie (CANADA)
- Annexe
English 17
Using the cooktop burners
To monitor the cooktop remotely
1. Make sure the Smart Connect LED indicator turns on. If the Smart Connect LED
indicator does not turn on, press the Smart Connect button. The cooktop can
now be monitored remotely with a connected remote device.
2. Select the cooktop icon on the SmartThings app to open the cooktop monitor
app.
Smart connect on/off
If you set the Smart Connect to Off, mobile devices cannot connect to the cooktop.
To turn Smart Connect on, follow these steps:
1. Pull the RF control knob straight up to remove it.
2. Press the Smart Connect button.
NOTE
The Smart Connect LED indicator is on when Smart Connect is enable. The Smart
Connect LED indicator is off when Smart Connect is not enabled.
3. Put in the RF control knob.
NOTE
• The cooktop continues operating even if the Wi-Fi connection is lost.
• SmartThings Application will not work properly if the Wi-Fi Connection is
unstable.
• See the SmartThings app manual for detailed information.
• For further instructions, refer to the SmartThings app web manual at www.
samsung.com
NOTE
The Smart Connect button is below the RF control knob. If you need to press the
Smart Connect button, remove the RF control knob by grasping it and then pulling
it straight up.
Smart Connect button
Smart Connect LED indicator
NA9300K CHEF_DG68-01014A-03_EN+MES+CFR.indb 17 2018-08-29 4:23:35