Installation Guide

English 21
Installation instructions
30” Model : NA30R5310F*
NOTE
Install the grates as instructed below for longest life. When installed properly, the
openings in the grates are centered over the burners.
The two cooktop grates are designed to t in specic positions on the cooktop.
For maximum stability, these grates should only be used in their proper positions.
• Place the grate with lled-in section on the right side to the left side, and the
grate with lled-in section on the left side to the right side.
• Each grates must be installed with the lled-in section, marked ‘BACK’, oriented
towards the back of the cooktop.
To replace the grates correctly, follow these steps:
1. Orient the center grate as noted direction.
2. Gently lower the legs of the Left grate so that leg dimples can match embosses
on cooktop.
3. Locate lled-in section of right grate to face back side of the cooktop.
4. Gently lower the legs of right grate into the corresponding embosses without
interfering with left grate overhang.
Filled-in section of
left grate
Filled-in section of
right grate
Install_NA30R5310FG_AA_DG68-01133A-00_EN.indd 21 2019-04-12  12:13:37