User Manual
Table Of Contents
- important safety instructions
- installing the oven
- preparing to install the range
- connecting the power
- installing the range
- introducing your new range
- before you begin
- getting started
- surface cooking
- operating the oven
- The oven control panel
- Using the oven racks
- Minimum and maximum settings
- Baking
- Convection baking
- Convection roasting
- Timed cooking
- Delay start
- Broiling
- Using the favorite cook feature
- Using the healthy cook feature
- Using the keep warm function
- Using the bread proof function
- Using the options function
- Using the temp probe
- Setting the sabbath feature
- maintaining your appliance
- troubleshooting
- warranty (U.S.A)
- instrucciones de seguridad importantes
- instalación del horno
- preparación para instalar la estufa
- cómo conectar la corriente eléctrica
- instalación de la estufa
- introducción a su nueva estufa
- antes de comenzar
- primeros pasos
- superficie de cocción
- operación del horno
- El panel de control del horno
- Uso de las parrillas del horno
- Ajustes mínimos y máximos
- Hornear
- Hornear por convección
- Asar por convección
- Cocción regida por temporizador
- Inicio retardado
- Asar a la parrilla
- Cómo utilizar la función de cocción favorita
- Uso de la función de cocción saludable
- Cómo usar la función mantener caliente
- Uso de la función entibiar pan para leudado
- Cómo usar la función de opciones
- Uso de la sonda de temperatura
- Cómo programar la función Shabat
- mantenimiento de su electrodoméstico
- resolución de problemas
- GARANTÍA
- consignes de sécurité importantes
- installation du four
- préparation avant l'installation de la cuisinière
- mise sous tension
- installation de la cuisinière
- présentation de votre nouvelle cuisinière
- avant de commencer
- démarrage
- table de cuisson
- utilisation du four
- Tableau de commande du four
- Utilisation des grilles du four
- Réglages minimum et maximum
- Faire cuire
- Cuisson par convection
- Rôtissage par convection
- Cuisson minutée
- Départ différé
- Cuisson au gril
- Utilisation de la fonction cuisson favorite
- Utilisation de la fonction cuisson saine
- Utilisation de la fonction de maintien au chaud
- Utilisation de la fonction de pain précuit
- Utilisation de la fonction des options
- Utilisation de la sonde thermique
- Réglage de la fonction shabbat
- entretien de votre appareil
- dépannage
- garantie (États-Unis)
![](/manual/samsung/ne58k9500sg/user-manual-english-spanish-french/images/img-25.png)
SURFACE COOKING
Installing a 4-wire power cord
WARNING
WARNING The neutral wire of the supply circuit must be connected to the neutral
terminal located in the lower center of the terminal block. The power leads must be connected to the
lower left and the lower right terminals of the terminal block. The 4th grounding lead must be connected
to the frame of the range with the ground plate and the ground screw.
1. Remove the 3 lower terminal screws from the terminal block. Remove the ground screw and
ground plate and retain them.
2. Cut and discard the ground strap. Do not discard any screws.
3. Insert the ground screw into the power cord ground wire terminal ring, through the ground plate,
and into the frame of the range.
4. Insert the 3 terminal screws (removed earlier) through each power cord terminal ring and into the
lower terminals of the terminal block. Be certain that the center wire (white/neutral) is connected to
the center lower position of the terminal block. Tighten screws securely to the terminal black.
5. Go to step 5 on page 26 to continue with the installation.
Ground strap
Ground plate
Ground
screw
Neutral
terminal
Ground
wire (Green)
White
Black
Red
Black
White
Red
Live 2
Live 1
CAUTION
CAUTION You must check voltage after connecting power cord.
Live 1 - Neutral 120 V
Live 2 - Neutral 120 V
Live 1 - Live 2 208 V / 240 V
English - 25
03 CONNECTING THE POWER