User Manual
Table Of Contents
- important safety instructions
- installing the oven
- preparing to install the range
- connecting the power
- installing the range
- introducing your new range
- before you begin
- getting started
- surface cooking
- operating the oven
- The oven control panel
- Using the oven racks
- Minimum and maximum settings
- Baking
- Convection baking
- Convection roasting
- Timed cooking
- Delay start
- Broiling
- Using the favorite cook feature
- Using the healthy cook feature
- Using the keep warm function
- Using the bread proof function
- Using the options function
- Using the temp probe
- Setting the sabbath feature
- maintaining your appliance
- troubleshooting
- warranty (U.S.A)
- instrucciones de seguridad importantes
- instalación del horno
- preparación para instalar la estufa
- cómo conectar la corriente eléctrica
- instalación de la estufa
- introducción a su nueva estufa
- antes de comenzar
- primeros pasos
- superficie de cocción
- operación del horno
- El panel de control del horno
- Uso de las parrillas del horno
- Ajustes mínimos y máximos
- Hornear
- Hornear por convección
- Asar por convección
- Cocción regida por temporizador
- Inicio retardado
- Asar a la parrilla
- Cómo utilizar la función de cocción favorita
- Uso de la función de cocción saludable
- Cómo usar la función mantener caliente
- Uso de la función entibiar pan para leudado
- Cómo usar la función de opciones
- Uso de la sonda de temperatura
- Cómo programar la función Shabat
- mantenimiento de su electrodoméstico
- resolución de problemas
- GARANTÍA
- consignes de sécurité importantes
- installation du four
- préparation avant l'installation de la cuisinière
- mise sous tension
- installation de la cuisinière
- présentation de votre nouvelle cuisinière
- avant de commencer
- démarrage
- table de cuisson
- utilisation du four
- Tableau de commande du four
- Utilisation des grilles du four
- Réglages minimum et maximum
- Faire cuire
- Cuisson par convection
- Rôtissage par convection
- Cuisson minutée
- Départ différé
- Cuisson au gril
- Utilisation de la fonction cuisson favorite
- Utilisation de la fonction cuisson saine
- Utilisation de la fonction de maintien au chaud
- Utilisation de la fonction de pain précuit
- Utilisation de la fonction des options
- Utilisation de la sonde thermique
- Réglage de la fonction shabbat
- entretien de votre appareil
- dépannage
- garantie (États-Unis)
![](/manual/samsung/ne58k9500sg/user-manual-english-spanish-french/images/img-66.png)
troubleshooting
TROUBLESHOOTING
Samsung works hard to ensure that you don’t have problems with your new electric range. If you run into
unexpected trouble, look first for a solution in the table below. If, after trying the suggested solution, you’re
still having trouble, call Samsung at 1-800-SAMSUNG (1-800-726-7864).
PROBLEM POSSIBLE CAUSE SOLUTION
The range is not
level.
The appliance has been installed
improperly.
• Place the oven rack in the center of the
oven. Place a level on the oven rack.
Adjust the leveling legs at the base of the
range until the oven rack is level.
• Insure the floor is level and strong and
stable enough to adequately support the
range.
The floor is sagging or sloping.
• Contact a carpenter to correct the situation.
The kitchen cabinets are not
properly aligned and make the
range appear to be not level.
• Insure the cabinets are square and provide
sucient room for installation.
The appliance
must be accessed
for servicing and
cannot be moved
easily.
The kitchen cabinets are not
square and built too tightly in to the
appliance.
• Contact a builder or installer to make the
appliance accessible.
Carpet is interfering with
movement of the range.
• Provide sucient space so the range can
be lifted over the carpet.
The oven control
beeps and displays
an error code.
You have a function error code.
CODE CAUSE
E-21 Oven sensor opened
E-22 Oven sensor shorted
E-24 Oven heating over
E-2E Temp probe error
E-0E Door locking error
E-83 Communication error
-tE- Communication error
(Touch)
• Press Oven O and restart the oven. Ifthe
problem persists, disconnect all power to
the range for at least 30seconds and then
reconnect the power. If this does not solve
the problem, call for service.
The surface units
will not maintain
a rolling boil or
will not cook fast
enough.
You may be using inappropriate
cookware.
• Use pans which are flat and match the
diameter of the surface unit selected.
In some areas, the power (voltage)
may be low.
• Cover the pan with a lid until the desired
heat is obtained.
The surface units
will not turn on.
A fuse in your home may be blown
or the circuit breaker tripped.
• Replace the fuse or reset the circuit
breaker.
The cooktop controls are set
improperly.
• Check to see the correct control is set for
the surface unit you are using.
The surface unit
stops glowing when
changed to a lower
setting.
This is normal. The unit is still on and hot.
English - 66