User Manual

English 37
Operating the oven
Using the partition
• To use twin mode operation, insert the partition.
• You cannot use the Self-Clean or Steam-Clean functions when the partition is
installed in the oven cavity.
• Handle the partition with both hands.
• Use oven gloves when inserting or removing the partition.
To Install the Partition into the Oven Cavity
1. Insert the partition into the 5th rack
position of the cavity.
2. Push the partition in until its back end
rests against the back of the cavity.
3. If the partition is installed correctly, the
"-" icon appears on the display.
CAUTION
Range displays "-dC-"
• Check the partition to see if it is installed correctly.
To Insert the Partition into the Partition Storage Location
1. Open the warming drawer.
2. Tilt the partition up slightly and rest
it on the slides on either side of the
storage location.
3. Tip the partition down and push it in.