Manual
Table Of Contents
- Important safety instructions
- Introducing your new range
- Before you begin
- Surface cooking
- About induction cooktop cooking
- How to set the appliance for cooktop cooking
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Induction cookware test
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Suggested settings for cooking specific foods
- Protecting the cooktop
- Operating the oven
- The oven control panel
- Oven lock
- Setting the clock
- Setting the kitchen timer
- Timed cooking
- Delay start
- Turning the oven light on and off
- Minimum and maximum settings
- Using the oven racks
- Baking
- Broiling
- Using the special fuction
- Using the keep warm feature
- Using the smart control feature
- Using the voice control
- Using the options function
- Using the Sabbath feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Introducción a su nueva estufa
- Antes de comenzar
- Superficie de cocción
- Acerca de la cocción en cubierta de inducción
- Como regular su estufa para la cocción de cubierta
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Prueba de utensilios para cocción por inducción
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Ajustes sugeridos para cocinar alimentos específicos
- Protección de la cubierta
- Funcionamiento del horno
- Panel de control del horno
- Bloqueo del horno
- Ajuste del reloj
- Cómo programar el temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Cómo encender y apagar la luz del horno
- Ajustes mínimos y máximos
- Uso de las parrillas del horno
- Hornear
- Asar a la parrilla
- Uso de la función especial
- Cómo usar la función de mantener caliente
- Uso de la función de control inteligente
- Uso de la función de control por voz
- Cómo usar la función de opciones
- Uso de la función Sabbat
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía (EE.UU.)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Présentation de votre nouvelle cuisinière
- Avant de commencer
- Table de cuisson
- Cuisson sur une table à induction
- Comment régler la cuisinière pour utiliser la table de cuisson ?
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Test des ustensiles de cuisine à induction
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Suggestion de réglages pour la cuisson d'aliments spécifiques
- Protection de la table de cuisson
- Utilisation du four
- Panneau de commande du four
- Verrouillage du four
- Réglage de l'horloge
- Réglage de la minuterie
- Cuisson minutée
- Départ différé
- Activation et désactivation de l'éclairage du four
- Réglages minimum et maximum
- Utilisation des grilles du four
- Cuisson traditionnelle
- Cuisson au gril
- Utilisation de la Fonction spéciale
- Utilisation de la fonction Maintien au chaud
- Utilisation de la fonction Smart Control
- Utilisation de la fonction Commande vocale
- Utilisation de la fonction des options
- Utilisation de la fonction Sabbat
- Entretien de votre appareil
- Dépannage
- Garantie (ÉTATS-UNIS)
- Garantie (CANADA)
- Annexe
26 English
Surface cooking
Surface cooking
CORRECT INCORRECT
Flat pan bottom & straight sides.
Curved or warped pan bottoms or
sides.
Pan size meets or exceeds the
recommended minimum size for the
Cooking Zone. See "Using the correct
size cookware" on page 27.
Pan does not meet the minimum size
required for the Cooking Zone used.
See "Using the correct size cookware"
on page 27.
Pan rests completely on the Cooktop
surface.
Pan bottom rests on cooktop trim
or does not rest completely on the
cooktop surface.
Pan is properly balanced.
Heavy handle tilts pan.
NOTE
ANY one of the incorrect conditions listed above may be detected by the sensors
located below the ceramic cooktop surface. If the cookware does not meet one
or more of these conditions, one or more of the Cooking Zones will not heat, and
settings will ash in the affected Cooking Zone display. Correct the problems
before attempting to activate the cooktop.
Before using the cooktop
Use quality cookware in good condition
The cookware used with the cooktop
surface should have at bottoms that make
good contact with the entire surface of the
Cooking Zone. Check for atness by rotating
a ruler across the bottom of the cookware.
Be sure to follow all the recommendations
for using cookware.
Also remember to
• Use cookware made with the correct material for induction cooking.
See "Cookware for induction cooking zones" on page 27.
• Use quality cookware with heavier bottoms for better heat distribution
allowing for more even cooking results.
• The pan size should match the amount of food being prepared.
• Do not let pans boil dry. This may cause permanent damage in the form of
breakage, fusion, or marring that can affect the ceramic cooktop. (This type of
damage is not covered by your warranty.)
• Do not use dirty pans with grease buildup. Always use pans that are easy to
clean after cooking.
CAUTION
• The Cooking Zones may appear to be cool while turned ON and after they
have been turned OFF. The glass surface may be HOT from residual heat
transferred from the cookware and burns may occur.
• DO NOT TOUCH HOT COOKWARE or PANS directly with your hands. Always
use oven mitts or pot holders to protect your hands from burns.
• DO NOT SLIDE cookware across the cooktop surface. Doing so may
permanently damage the appearance of the ceramic cooktop.