Use and Care Manual

36 English
Operating the oven
Operating the oven
Using the options function
This function enables you to control various electronic control options.
Refer to the following table for available options.
The option menu is only available when the oven is not being used (not cooking).
Options Feature
1. Temp Adjust Lets you correct the temperature in the oven.
2. Temp Unit Lets you program the oven control to display
temperatures in Fahrenheit or Centigrade.
3. 12 hour energy
saving
This feature automatically turns off the oven after 12
hours during baking functions or after 3 hours during a
broil function.
4. Sound On/Off Lets you set the oven controls to operate silently.
5. Wi-Fi On/Off Lets you set the wi- network to deactivate.
0. Demo mode This option is for use by retail establishments for display
purposes only.
NOTE
Options key location
Temp Adjust
The temperature in the oven has been calibrated at the factory. When rst using
the oven, be sure to follow recipe times and temperatures. If you think the oven is
too hot or too cool, you can correct the temperature in the oven. Before correcting,
test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how
much of an adjustment is needed.
The oven temperature can be adjusted ±35 °F (±19 °C ).
How to correct the oven temperature
1. Press Options for 3 seconds.
2. Press or to select 1, and then press START/SET.
3. Press or to select the desired temperature you want to adjust. (-35
~
35)
4. Press START/SET to save the changes.
NOTE
This adjustment will not affect the broiling or the self-cleaning temperatures. The
adjustment will be retained in memory after a power failure.
Temp Unit (Fahrenheit or Celsius temperature selection)
You can program the oven control to display the temperature in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Celsius or Celsius to Fahrenheit
1. Press Options for 3 seconds.
2. Press or to select 2, and then press START/SET.
3. Press or to select F (Fahrenheit) or C (Celsius).
4. Press START/SET to save the changes.
12-hour energy saving
If you accidently leave the oven on, this feature will automatically turn off the
oven after 12-hours during baking functions or after 3 hours during a broil
function. (Default setting : on)
How to turn the 12-hour energy saving feature on or off
1. Press Options for 3 seconds.
2. Press or to select 3, and then press START/SET.
3. Press or to select --Hr (Off) or 12Hr (On).
4. Press START/SET to save the changes.
NE63T811_AA_DG68-01212A-00_EN.indd 36 2020-03-24  7:09:51