User Manual
Table Of Contents
- Important safety instructions
- Introducing your new range
- Before you begin
- Surface cooking
- Operating the oven
- The oven control panel
- Oven lock
- Setting the clock
- Setting the kitchen timer
- Timed cooking
- Delay start
- Turning the oven light on and off
- Minimum and maximum settings
- Using the oven racks
- Baking
- Convection baking
- Convection roasting
- Broiling
- Air fry
- Using the special function
- Using the keep warm feature
- Using the smart control feature
- Using the voice control
- Using the options function
- Using the Sabbath feature
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Introducción a su nueva estufa
- Antes de comenzar
- Superficie de cocción
- Funcionamiento del horno
- Panel de control del horno
- Bloqueo del horno
- Ajuste del reloj
- Cómo programar el temporizador de cocina
- Cocción por temporizador
- Retrasar el inicio
- Cómo encender y apagar la luz del horno
- Ajustes mínimos y máximos
- Uso de las parrillas del horno
- Hornear
- Horneado por convección
- Asar por convección
- Asar a la parrilla
- Freidora de aire
- Uso de la función especial
- Cómo usar la función de mantener caliente
- Uso de la función de control inteligente
- Uso de la función de control por voz
- Cómo usar la función de opciones
- Uso de la función Sabbat
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía (EE.UU.)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Présentation de votre nouvelle cuisinière
- Avant de commencer
- Table de cuisson
- Utilisation du four
- Panneau de commande du four
- Verrouillage du four
- Réglage de l'horloge
- Réglage de la minuterie
- Cuisson minutée
- Départ différé
- Activation et désactivation de l'éclairage du four
- Réglages minimum et maximum
- Utilisation des grilles du four
- Cuisson traditionnelle
- Cuisson par convection
- Rôtissage par convection
- Cuisson au gril
- Friture par application d'air
- Utilisation de Fonction spéciale
- Utilisation de la fonction Maintien au chaud
- Utilisation de la fonction Smart Control
- Utilisation de la fonction commande vocale
- Utilisation de la fonction des options
- Utilisation de la fonction Sabbat
- Entretien de votre appareil
- Dépannage
- Garantie (ÉTATS-UNIS)
- Garantie (CANADA)
- Annexe
English 47
Maintaining your appliance
Oven racks
If the racks are left in the oven during a self-cleaning cycle, their color will turn
slightly blue and the nish will be dull. After the self-cleaning cycle is complete
and the oven has cooled, rub the sides of the racks with wax paper or a cloth
containing a small amount of oil. This will help the racks glide more easily on their
tracks.
NOTE
• Do not clean in a dishwasher.
• If the rack becomes hard to remove or replace, lightly wipe the oven rack
guides with cooking oil. Do not wipe cooking oil on the slides.
• If the rack becomes difcult to slide, the rack may need to be lubricated using
a graphite lubricant.
NOTE
• To order graphite lubricant., call Samsung customer care at 1-800-SAMSUNG
(726-7864) or visit our homepage (www.samsung.com/us/support, www.
samsung.com/ca/support, or www.samsung.com/ca_fr/support) and reference
part number DG81-01629A.
• If you want to buy directly, connect to http://www.samsungparts.com/Default.
aspx.
Air fry tray
To keep the Air fry tray clean, remove them from the cavity, and soak them in
Lukewarm soapy water. Then, scour soil off of the Air fry tray using a plastic
scouring pad.
NOTE
The air fry tray is dishwasher-safe.
CAUTION
Do not leave the air fry tray in the oven during the self-cleaning cycle. The
extreme heat generated in this cycle can permanently peel off the air fry coating,
their color will turn slightly blue and nish will be dull.
Cleaning painted parts and decorative trim
• For general cleaning, use a cloth with hot, soapy water.
• For more difcult residue and built-up grease, apply a liquid detergent directly
onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry.
Do not use abrasive cleaners on any of these surfaces. They can scratch.
Cleaning stainless steel surfaces
1. Shake the bottle of STAINLESS STEEL APPLIANCE CLEANER or POLISH well.
2. Place a small amount of STAINLESS STEEL APPLIANCE CLEANER or POLISH on
a damp cloth or damp paper towel.
3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
NOTE
• Do not use a steel-wool pad. It will scratch the surface.
• If a mineral oil-based STAINLESS STEEL APPLIANCE CLEANER has been used
before to clean the appliance, wash the surface with dishwashing liquid and
water prior to using the STAINLESS STEEL APPLIANCE CLEANER or POLISH.