User Manual

10 English

Important safety instructions

SAVE THESE INSTRUCTIONS

• Flush-mounted appliances may be operated only after they

have been installed in cabinets and workplaces that conform

to the relevant standards. This ensures that the appliances

are installed in compliance with the appropriate safety

standards.

• If your appliance malfunctions or if fractures, cracks, or

splits appear:

- switch off all cooking zones

- unplug the range from the AC wall outlet

- contact your local Samsung service center.

WARNING

If the surface is cracked, switch off and unplug the appliance to avoid

the possibility of electrical shock. Do not use your cooktop until the

glass surface has been replaced.

WARNING

• Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

• The range should not be placed on a base.

• Be sure you know which control knob operates each surface

unit. Make sure you turned on the correct surface unit.

• Always turn the surface units off before removing cookware.

• When preparing aming foods under the hood, turn the fan on.

• Keep an eye on foods being fried at high or medium high

heat settings.

• Do not store heavy items above the cooktop surface that

could fall and damage it.

• Do not use decorative surface element covers – If an element

is accidentally turned on, the decorative cover will become

hot and possibly melt. Burns will occur if the hot covers are

touched. Damage may also be done to the cooktop.

ELECTRICAL SAFETY

• Proper Installation - Be sure your appliance is properly

installed and grounded by a qualied technician.

• The appliance should be serviced only by qualied service

personnel. Repairs carried out by unqualied individuals

may cause injury or a serious malfunction. If your appliance

is in need of repair, contact a Samsung authorized service

center. Failure to follow these instructions may result in

damage and void the warranty.

Important safety instructions

NE63T8711_AA_DG68-01209A-00_EN.indd 10 3/27/2020 12:43:55 PM