User Manual
Table Of Contents
- Important safety instructions
- What you need to know about safety instructions
- California Proposition 65 Warning
- For your safety
- Induction cooktop elements
- Electrical safety
- Child safety
- Oven
- Remote Operation
- Self-cleaning ovens
- Ventilating hood
- Glass/Ceramic cooking surfaces
- Critical installation warnings
- Critical usage warning
- Usage cautions
- Critical cleaning warnings
- Introducing your new range
- Before you begin
- Surface cooking
- About induction cooktop cooking
- How to set the appliance for cooktop cooking
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Induction cookware test
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Suggested settings for cooking specific foods
- Protecting the cooktop
- Operating the oven
- The oven control panel
- How to use dial knob
- Lock
- Display mode
- Turning the oven light on and off
- Clock
- Dual Door™
- Single mode
- Twin mode
- Cooking mode
- Twin Mode Temperature setting ranges
- Using the oven racks
- Using the gliding rack
- Using the divider
- Recipe guide
- Temperature probe (Single Mode Only)
- Cooking options
- Special features
- More functions
- System Settings
- Smart control
- Voice control
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
24 English
Surface cooking
Surface cooking
Digital display
•
Power Boost : Use this setting to heat up the contents of a pot or pan faster
than the maximum power level " " (Hi).
• Displayed if an element knob was set to an On position after the Sabbath
or Self-clean mode has ended or been cancelled, and the range was not able to
detect a pot or pan on the burner within 30 seconds. To return the display to
normal and use the cooktop, set the knob to the Off position.
• Error message. Displayed if the Induction cooktop has overheated because
of abnormal operation. Example : Operating with empty cookware.
• Error message. Displayed if the cookware on an element is unsuitable, too
small, or if no cookware has been placed on the cooking zone.
• , Displayed when the Sabbath or Self-clean mode is operating.
How to set the appliance for cooktop cooking
CAUTION
• The cooktop elements may be hot even when off and burns can occur. Do not
touch the cooktop elements until they have cooled down sufciently.
• Never leave cooking food unattended when you set the heating element to 6
or higher. Boilovers cause smoke. Greasy spillovers may catch on re.
• Be sure you turn the control knob to OFF when you nish cooking.
Induction cooktop control knob
1
1
2
1. Push the knob in.
2. Turn in either direction to the setting
you want.
3. The digital displays will show " - ", "
" or " ".
• Move the Knob dial until the
desired power level setting
appears in the digital display:
, to (Hi), (Boost).
NOTE
Should one or more of the cooking zones switch off before the indicated time has
elapsed, see the "Troubleshooting" section. (page 66)