User Manual
Table Of Contents
- Important safety instructions
- What you need to know about safety instructions
- California Proposition 65 Warning
- For your safety
- Induction cooktop elements
- Electrical safety
- Child safety
- Oven
- Remote Operation
- Self-cleaning ovens
- Ventilating hood
- Glass/Ceramic cooking surfaces
- Critical installation warnings
- Critical usage warning
- Usage cautions
- Critical cleaning warnings
- Introducing your new range
- Before you begin
- Surface cooking
- About induction cooktop cooking
- How to set the appliance for cooktop cooking
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Induction cookware test
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Suggested settings for cooking specific foods
- Protecting the cooktop
- Operating the oven
- The oven control panel
- How to use dial knob
- Lock
- Display mode
- Turning the oven light on and off
- Clock
- Dual Door™
- Single mode
- Twin mode
- Cooking mode
- Twin Mode Temperature setting ranges
- Using the oven racks
- Using the gliding rack
- Using the divider
- Recipe guide
- Temperature probe (Single Mode Only)
- Cooking options
- Special features
- More functions
- System Settings
- Smart control
- Voice control
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
English 53
Operating the oven
System Settings
Tap and hold for 3 sec, on the control panel, and then Turn the dial knob to
change various settings for your oven.
Please refer to the following table for detailed descriptions.
System Setting Description
Wi-Fi Set the WI-FI mode to On/Off.
NOTE
See page 55.
Language Select a preferred language from English or French.
Temp. Unit Set the oven control to display temperatures in
Fahrenheit or Centigrade.
Calibrate Temp Recalibrate the oven temperature.
My Pattern This function remembers and stores the cook settings.
Default Cavity Set default cavity in twin mode.
Welcome Lighting Set the Welcome Lighting mode to On/Off.
Virtual Flame
TM
Set the Virtual Flame
TM
function to On/Off.
Demo mode Used by retailers for display purposes only.
Reset Reset the your setting. (More Functions, Systerm
settings)
Language
Select a preferred language from English, or French. You can not change the
language during cooking.
1. Tap and hold
for 3 sec.
2. Select the Language using the dial knob.
3. Turn the dial knob to select the Language and push to save the changes.
Temp. Unit (°F / °C)
Change the temperature format of the oven to Fahrenheit or Celsius.
The default is Fahrenheit.
1. Tap and hold
for 3 sec.
2. Select Temp. Unit using the dial knob.
3. Turn the dial knob to select unit and push to save the changes.
Calibrate Temp
The oven temperature has been calibrated at the factory. When rst using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
1. Tap and hold
for 3 sec.
2. Select Calibrate Temp using the dial knob.
3. Turn the dial knob to adjust temperature value.
4. Push the dial knob to save the changes.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
My Pattern
This function remembers and stores the cook settings frequently used by the user.
1. Tap and hold
for 3 sec.
2. Select My Pattern using the dial knob.
3. Turn the dial knob to select On/Off and push to save the changes.