User Manual
Table Of Contents
- Important safety instructions
- Introducing your new range
- Before you begin
- Surface cooking
- About induction cooktop cooking
- How to set the appliance for cooktop cooking
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Induction cookware test
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Suggested settings for cooking specific foods
- Protecting the cooktop
- Operating the oven
- The oven control panel
- How to use dial knob
- Lock
- Display mode
- Turning the oven light on and off
- Clock
- Dual Door™
- Single mode
- Twin mode
- Cooking mode
- Twin Mode Temperature setting ranges
- Using the oven racks
- Using the gliding rack
- Using the divider
- Recipe guide
- Temperature probe (Single Mode Only)
- Cooking options
- Special features
- More functions
- System Settings
- Smart control
- Voice control
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Introducción a su nueva estufa
- Antes de comenzar
- Superficie de cocción
- Acerca de la cocción en cubierta de inducción
- Como regular su estufa para la cocción de cubierta
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Prueba de utensilios para cocción por inducción
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Ajustes sugeridos para cocinar alimentos específicos
- Protección de la cubierta
- Funcionamiento del horno
- Panel de control del horno
- Cómo utilizar la perilla de disco
- Bloqueo
- Modo de visualización.
- Cómo encender y apagar la luz del horno
- Reloj
- Dual Door™
- Modo simple
- Modo doble
- Modo de cocción
- Rangos de ajuste de temperatura del modo doble
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajustes del sistema
- Control inteligente
- Control por voz
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía (EE.UU.)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Présentation de votre nouvelle cuisinière
- Avant de commencer
- Table de cuisson
- Cuisson sur une table à induction
- Comment régler la cuisinière pour utiliser la table de cuisson ?
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Test des ustensiles de cuisine à induction
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Suggestion de réglages pour la cuisson d'aliments spécifiques
- Protection de la table de cuisson
- Utilisation du four
- Tableau de commande du four
- Comment utiliser le bouton de réglage ?
- Verrouillage
- Mode d'affichage
- Activation et désactivation de l'éclairage du four
- Horloge
- Dual Door™
- Mode unique
- Mode double
- Mode de cuisson
- Plages de réglage de la température en mode double
- Utilisation des grilles de cuisson
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Sonde thermique (mode unique seulement)
- Options de cuisson
- Fonctions spéciales
- Autres fonctions
- Réglages système
- Commande intelligente
- Commande vocale
- Entretien de votre appareil
- Dépannage
- Garantie (ÉTATS-UNIS)
- Garantie (CANADA)
- Annexe
72 English
Troubleshooting
Troubleshooting
Displayed
code
Possible cause Solution
Bad line This error message appears
if the power cord is installed
improperly.
If the power connection is
plugged in improperly, that
code appears on the display.
Reconnect the power
connection properly, and the
message disappears.
C-A2 This code occurs if the sub PCB
temperature rises abnormanlly
high.
Press OFF.
Check the oven vent and
cooling vent. If the vent is
closed, never block the vent
by anything. After cooling the
oven, restart the oven.
If this does not solve the
problem, call for service.
COOKTOP
Displayed code Possible cause Solution
This code occurs if communication
between the Main and Inverter PBA
is interrupted.
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
The top sensor is open when the
burner is operating.
Call for service
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.
Displayed if the cookware on an
element is unsuitable or too small
or no cookware has been placed on
the cooking zone.
Check the cookware