User Manual
Table Of Contents
- Important safety instructions
- Introducing your new range
- Before you begin
- Surface cooking
- About induction cooktop cooking
- How to set the appliance for cooktop cooking
- Before using the cooktop
- Cookware for induction cooking zones
- Using the correct size cookware
- Pot and pan sizes
- Induction cookware test
- Operating noises
- Using suitable induction cookware
- Temperature detection
- Suggested settings for cooking specific foods
- Protecting the cooktop
- Operating the oven
- The oven control panel
- How to use dial knob
- Lock
- Display mode
- Turning the oven light on and off
- Clock
- Dual Door™
- Single mode
- Twin mode
- Cooking mode
- Twin Mode Temperature setting ranges
- Using the oven racks
- Using the gliding rack
- Using the divider
- Recipe guide
- Temperature probe (Single Mode Only)
- Cooking options
- Special features
- More functions
- System Settings
- Smart control
- Voice control
- Maintaining your appliance
- Troubleshooting
- Warranty (U.S.A)
- Warranty (CANADA)
- Appendix
- Instrucciones de seguridad importantes
- Introducción a su nueva estufa
- Antes de comenzar
- Superficie de cocción
- Acerca de la cocción en cubierta de inducción
- Como regular su estufa para la cocción de cubierta
- Antes de usar la cubierta
- Utensilio de cocina para zonas de cocción por inducción
- Uso del tamaño de utensilio de cocina correcto
- Tamaño de ollas y sartenes
- Prueba de utensilios para cocción por inducción
- Ruidos de funcionamiento
- Usar utensilios de cocina adecuados para inducción
- Detección de temperatura
- Ajustes sugeridos para cocinar alimentos específicos
- Protección de la cubierta
- Funcionamiento del horno
- Panel de control del horno
- Cómo utilizar la perilla de disco
- Bloqueo
- Modo de visualización.
- Cómo encender y apagar la luz del horno
- Reloj
- Dual Door™
- Modo simple
- Modo doble
- Modo de cocción
- Rangos de ajuste de temperatura del modo doble
- Uso de las parrillas del horno
- Uso de la parrilla deslizante
- Uso del divisor
- Guía de recetas
- Sonda de temperatura (solo modo simple)
- Opciones de cocción
- Funciones especiales
- Más funciones
- Ajustes del sistema
- Control inteligente
- Control por voz
- Mantenimiento de su electrodoméstico
- Resolución de problemas
- Garantía (EE.UU.)
- Garantía (CANADÁ)
- Apéndice
- Consignes de sécurité importantes
- Présentation de votre nouvelle cuisinière
- Avant de commencer
- Table de cuisson
- Cuisson sur une table à induction
- Comment régler la cuisinière pour utiliser la table de cuisson ?
- Avant d'utiliser la table de cuisson
- Récipients pour les zones de cuisson à induction
- Utiliser des récipients de taille adaptée
- Tailles de récipients et de casseroles
- Test des ustensiles de cuisine à induction
- Bruits de fonctionnement
- Utilisation des récipients adaptés à la cuisson à induction
- Détection de la température
- Suggestion de réglages pour la cuisson d'aliments spécifiques
- Protection de la table de cuisson
- Utilisation du four
- Tableau de commande du four
- Comment utiliser le bouton de réglage ?
- Verrouillage
- Mode d'affichage
- Activation et désactivation de l'éclairage du four
- Horloge
- Dual Door™
- Mode unique
- Mode double
- Mode de cuisson
- Plages de réglage de la température en mode double
- Utilisation des grilles de cuisson
- Utilisation de la grille coulissante
- Utilisation de la plaque de séparation
- Guide des recettes
- Sonde thermique (mode unique seulement)
- Options de cuisson
- Fonctions spéciales
- Autres fonctions
- Réglages système
- Commande intelligente
- Commande vocale
- Entretien de votre appareil
- Dépannage
- Garantie (ÉTATS-UNIS)
- Garantie (CANADA)
- Annexe
English 71
Troubleshooting
Displayed
code
Possible cause Solution
C-22
The sub PCB sensor is open
when the oven is operating.
Press OFF, and then restart
the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect
the power. If this does not
solve the problem, call for
service.
There is a short in the sub PCB
sensor.
C-23
The temperature probe sensor
is short when the oven is
operating.
C-30
The main PCB sensor is open
when the oven is operating.
There is a short in the main PCB
sensor.
C-31
This code occurs if the PCB
temperature rises abnormally
high.
Call for service
-dC- This code appears if the divider
is inserted or removed while the
oven is operating.
Make sure the divider is
inserted properly, and then
restart the oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Information codes
OVEN
Displayed
code
Possible cause Solution
C-d0 There is a short in the dial knob.
Press OFF, and then restart
the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect
the power. If this does not
solve the problem, call for
service.
C-d1 The door lock is misaligned.
C-F0
This code occurs if
communication between
the Main and Sub PBA is
interrupted.
C-F2
This code occurs if
communication between the
Main and Touch is interrupted.
C-20
The oven sensor is open when
the oven is operating.
There is a short in the Oven
sensor.
C-21
This code occurs if the internal
temperature rises abnormally
high.