User manual

Operating basic function _19
ENGLISH
DOMESTIC WATER HEATING OPERATION
In this mode, domestic water heating will be activated as required by the water temperature set point.
•Thesetpointcanbesetmanually
1. Press Power(DHWmode) button to turn on DHW tank.
 The priority between heating/cooling/water-law and
DHW modes are depending upon the user’s input of
Field Setting Value of Wired Remote Controller.
The default priority is on the DHW mode.
•ThismodecannotbeusedwhentheDHWtankis
not installed.
•ThePower(Spacemode) button and the
Power(DHWmode) button can be selected at the
same time.
•Inordertoprovidedomestichotwaterthroughouttheday,itisadvisedtokeepthe
domestic water heating operation on continuously.
•Whenthe
icon is displayed, hot water is delivered to the DHW tank by the solar
panel. The operation between solar panel and heat pump can be determined by using
Wired Remote Controller’s Field Setting Mode.
2. Press Mode(DHWmode) button until required operating mode is displayed.
 The heat pump will run on selected domestic water heating mode.
 •Economicdomesticwaterheating
 •Standarddomesticwaterheating
( may operate)
 •Powerfuldomesticwaterheating
( operate immediately)
3. Press Up or Down button to set the desired temperature.
 The temperature can be set between 30ºC to 70ºC.
The temperature is adjusted by 0.5ºC.
IB_EN DB98-32660-06_20140917.indd 19 2014/9/22 15:38:09