User Manual 2020.05.07

English 11
Range Hood Use
Range Hood Use
3. Remove the knockout in the terminal box cover, and then install a UL
listed or CSA approved
1
⁄2” strain relief.
E
F
A
B
C
D
A. White wires
B. Black wires
C. UL listed wire connectors
D. Green (or bare) and yellow-green ground wire
E. Home power supply cable
F. UL listed or CSA approved ½” strain relief
4. Use UL listed wire connectors to connect the black wires (B) together.
5. Use UL listed wire connectors to connect the white wires (A)
together.
WARNING
Electrical Shock Hazard
Electrically ground blower.
Connect the ground wire to the green and yellow ground wire in the
terminal box. Failure to do so can result in death or electrical shock.
6. Connect the green (or bare) ground wire from the home power
supply to the yellow-green ground wire (D) in the terminal box using
UL listed wire connectors.
7. Install the terminal box cover.
8. Reconnect the power.
Complete the Installation
1. Replace the bafe lters. See the “Range Hood Care” section.
2. Check the operation of the range hood fan and lights.
See the “Range Hood Use” section.
If the range hood does not operate, check to see whether a circuit
breaker has tripped or a household fuse has blown.
Disconnect the power and check the wiring connections.
NOTE
To get the most efcient use from your new range hood, read the “Range
Hood Care” section.
Range Hood Description
The range hood is designed to remove smoke, cooking vapors, and odors
from the cooktop area. For best results, start the hood before cooking and
allow it to operate several minutes after cooking to clear all smoke and
odors from the kitchen. The hood controls are located on the front of the
hood.
D
B
C
A
A. Bafe lter
B. Bafe lter handle
C. Blower and light controls
D. LED lamps
Range Hood Controls
A B C D E GF H I J
A. Power
B. Low Speed
C. Medium Speed
D. High Speed
E. Boost Speed
F. Timer Display
G. Timer
H. Light
I. Auto
Connectivity
J. Bluetooth
A. POWER
• Press the POWER button and the hood will turn on at default
speed (Default Speed : Low).
• Press again and the hood will return to sleep mode.
B. LOW
• Press the LOW button and the hood will turn on at Low speed.
C. MED
• Press the MED button and the hood will turn on at Medium speed.
D. HIGH
• Press the HIGH button and the hood will turn on at High speed.
E. BOOST
• Press the BOOST button and the hood will increase to Maximum
speed for 10 minutes.
• After 10 minutes, the hood will slow to High speed.
• Normal mode
High & Boost CFM is the same (390CFM).
• Power mode
High mode is 390 CFM and Boost mode is 600 CFM.
See Performance (CFM) Conversion on page 12.
F. Timer Display
• Shows the timer settings.