User Manual 2020.05.07

6 English
Tools and Parts
Removing the packaging
CAUTION
Remove the carton carefully. Wear gloves to protect against sharp edges.
WARNING
Remove the protective lm covering the product before putting into
operation.
Parts supplied
• Hood assembly with blower and LED lamps already installed.
• Hardware bag with:
Part Qty Part Qty
5x45 mm
4
5.4x75 mm screws
(for 10x60 mm wall
anchors)
4
4.5x13 mm
4
10 x 60 mm
4
3.5x9.5 mm
2
Torx 10 adapter
1
4.2x8 mm
7
Torx 20 adapter
1
6” (15.2 cm) round
transition
1
Rectangular transition
3
1
⁄4” x 10” (8.3 x 25.4
cm) with back draft
dampers
1
Rear blower
mounting bracket
1
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),
1
⁄8” (3.2 mm), and
1
⁄16” (4,8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips & Torx 20 screwdrive
r
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Dimensions and Clearances
A
B
L
K
H
E
G
F
C
I
D
J
NK30N7000US
NK30N7000UG
NK36N7000US
NK36N7000UG
A 30″ (76 cm) 36″ (91.2 cm)
B 19
6
⁄8″ (50 cm)
C 9
3
⁄4″ (25 cm)
D 13
13
⁄16″ (35 cm)
E 12″ (30.5 cm)
F 2
3
⁄16″ (5.5 cm)
G 7
1
⁄4″ (18.4 cm)
H 1
3
⁄16″ (3 cm)
I 1
1
⁄16″ (2.6 cm)
J
5
⁄8″ (1.6 cm)
K 1
10
⁄16″ (4 cm)
L 3″ (7.6 cm) 5
3
⁄4″ (14.6 cm)
Accessories
Model
NK30N7000US - NK36N7000US
NK30N7000UG - NK36N7000UG
Charcoal
Filter Kit
NK-AR050FNB/AA
Recirculation
Kit
NK-AF030FNB/AA
Installation Requirements
Installation Requirements