User Guide
Contents Chapter 1. Getting Started 3 6 21 24 30 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Off Chapter 2. Using Windows 8 33 34 36 38 41 What is Microsoft Windows 8? Screen At a Glance Using the Charms Using Apps Windows Hot Key Function Chapter 1 Getting Started 78 82 83 Using the Multimedia App (Optional) Samsung Software Update Diagnosing the Computer Status and Troubleshooting Chapter 4.
Chapter 1.
Before You Start Before reading the User Guide, first check the following information. Chapter 1 Getting Started Using the software •• From the Start Screen, right-click any area and select All •• Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment.
Before You Start Chapter 1 Getting Started Safety Precaution Notations Icon 4 Copyright Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. © 2013 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual.
Before You Start About the Product Capacity Representation Standard About the capacity representation of the storage The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the difference in capacity calculation. (E.g.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung computers, some pictures may differ from actual products. Chapter 1 Getting Started 6 Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur.
Safety Precautions Chapter 1 Getting Started Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. G If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center.
Safety Precautions Warning Chapter 1 Getting Started 8 AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. When the power supply is ungrounded, the current may leak resulting in electric shock.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the first time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1 Getting Started 10 Cutting the Power to the Internal Battery (for corresponding models only) Never heat the product (or battery) or put the product (or battery) into a fire. Do not put or use the product (or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or fire.
Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. •• Thereafter, if you connect the AC adapter, the battery power will be supplied again. •• Do not cut the battery power under normal conditions. •• This may result in data loss or a product malfunction. The location of the Emergency Hole may differ depending on the model.
Safety Precautions Warning Chapter 1 Getting Started Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a fire hazard. The computer may overheat and also present opportunity to thieves. Do not use your computer for long periods of time while any part of your body is making direct contact with it.
Safety Precautions Warning Chapter 1 Getting Started Security and Movement Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Before upgrading the computer, be sure to shutdown the computer first and then separate all connected cables. If the notebook computer has an external type (removable) battery, separate the battery, too. Failure to do so may cause electric shock. Follow the instructions for the relevant location (e.g.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 14 Battery Usage Related Dispose of worn-out batteries properly. •• There is a danger of fire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or fire.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light a cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Failure to do so may cause electric shock hazard. Make sure to have the product tested by a safety service engineer after repairing the product.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 16 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1 Getting Started 17 To connect a device that is not manufactured or authorized by Samsung Electronics, inquire at your service center before connecting the device. There is a danger of damaging the product. Upgrade Related Carefully touch a part or device of the product. Failing to do so may result in damage to the product or injury.
Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. •• A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk.
Safety Precautions Using the Power Supply in an Airplane Since the power outlet type differs depending on the type of airplane, connect the power appropriately. Since the representative figures of the power plug and the auto adapter are used, they may differ from the actual parts. Chapter 1 Getting Started 19 When Using the AC Power Plug Connect the power plug pins perpendicular into the center of the power outlet.
Safety Precautions Chapter 1 Getting Started When Using the Auto Adapter When a cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-flight Cigar Socket When Using the Airplane Charging Coverter Depending on the airplane, you have to use the auto adapter and charging converter.
Proper Posture During Computer Use Chapter 1 Getting Started 21 Maintaining a proper posture during computer use is very important to prevent physical harm. •• Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. •• Do not use the computer on your lap.
Proper Posture During Computer Use Chapter 1 Getting Started Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. •• Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. •• Avoid setting the monitor and LCD excessively bright. •• Keep the monitor and LCD screen clean. •• If you wear glasses, clean them before using the computer.
Proper Posture During Computer Use Chapter 1 Getting Started 23 Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume first to listen to music. •• Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination Check your volume! •• Do not use the computer in dark locations. The illumination level for computer use must be as bright as for reading a book. •• Indirect illumination is recommended.
Overview Chapter 1 Getting Started 24 Front View •• The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may differ from the actual appearance of the product depending on the model. •• The actual color and appearance of the computer may differ from the pictures used in this guide.
Overview Chapter 1 Getting Started 25 Status indicators and sensors (Optional) This shows the power source and the battery charge status. 1 Charge Status G reen: When the battery is fully charged or the battery is not installed. / Red or orange: When the battery is being charged. O ff: When the computer is running on battery power without being connected to AC adapter. 1 2 This sensor detects the ambient illumination of the PC.
Overview Chapter 1 Getting Started 26 Right View ► For 13.3 inch models ► For 15 inch models 1 1 2 3 4 5 Multi Card Slot A card slot supports multi cards. (Optional) SIM Card Slot (Optional) 1 Multi Card Slot This slot is for SIM cards. 2 Microphone You can use the built-in microphone. 3 Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. You can connect a VGA adapter (optional).
Overview Chapter 1 Getting Started 27 Left View ► For 13.3 inch models 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. This is a chargeable USB port that can be used to connect and charge a USB device. 1 2 3 4 2 Chargeable USB 3.0 Port For Windows XP, the USB 3.0 feature may be restricted. What is a chargeable USB port? •• USB device accessing and charging functions are supported.
Overview Chapter 1 Getting Started 28 Left View ► For 15 inch models 1 DC Jack A jack to connect the AC adapter that supplies power to the computer. This is a chargeable USB port that can be used to connect and charge a USB device. 1 2 3 4 5 6 2 Chargeable USB 2.0 Port 3 Ear-set / headset Jack What is a chargeable USB port? •• USB device accessing and charging functions are supported. •• The USB charging function is supported regardless of whether the power is turned on or off.
Overview Chapter 1 Getting Started 29 Bottom View ► For 13.3 inch models This hole is to cut the power supply to the battery. Insert and press one end of an unfolded paper clip into the hole it to cut the power to the battery. 1 Battery Emergency 1 Hole 2 T he location of the Emergency Battery Hole may differ depending on the model. 2 Speaker ► For 15 inch models For more information, refer to About the function to cut the power supply to the internal battery in the Safety Precautions.
Turning the Computer On and Off Chapter 1 Getting Started 30 Turning the computer on 1 2 3 Connect the AC adapter. Lift the LCD panel up. Press the Power button to turn the computer on. About Windows Activation When you turn the computer on for the first time, the Windows activation screen appears. Follow the activation procedures according to the instructions on the screen to use the computer.
Turning the Computer On and Off Turning the computer off áᔪ •• Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the Ŗᮁ purchased operating system. •• Save all your data before clicking on Shut down. 1 ᯲ The Charms menu appears when you place your mouse pointer at the edge of the top or bottom right of the screen. ᰆ⊹ 2 Click Settings > Power ᖅᱶ > Shut down.
Chapter 2.
What is Microsoft Windows 8? Chapter 2 Using Windows 8 Microsoft Windows 8 (hereafter referred to as Windows) is an operating system that is required for operating a computer. 33 Searching for Help To use your computer optimally, you need to know how to use it properly. Therefore, It is better to learn how to use Windows by utilizing Windows Help and Support. •• The screen may appear somewhat different depending on the model and the operating system.
Screen At a Glance Chapter 2 Using Windows 8 Windows 8 provides both the new Start screen mode and the Desktop mode of the existing OS. Start Screen 1 Start Screen Refers to the default Start screen of Windows 8. 2 App Refers to the apps that are currently installed. 3 Desktop Displaying the Charms Start Screen When you turn on the computer, the Start screen is displayed, which allows you to use the applications (Application, App, hereafter referred to as an App) at the same location.
Screen At a Glance Chapter 2 Using Windows 8 Desktop This provides similar functions to those provided by the Desktop in prior Windows versions. 1 2 3 2 4  1 Desktop Refers to the Desktop. The Charms is hidden at the right of the screen. Displaying the Place your mouse pointer at the edge of the 2 Charms top or bottom right of the screen to display the Charms.
Using the Charms Chapter 2 Using Windows 8 The Charms is a new type of menu that combines the Start menu with the Control Panel of existing Windows. The Charms allows you to quickly configure the device(s) connected to your computer, search for App(s)/file(s), and use the sharing function, etc. Activating the Charms Search Search Search Share Share Share If you move your mouse pointer to the top or bottom right corner of the screen, the Charms appears.
Using the Charms Chapter 2 Using Windows 8 37 Changing the Settings Frequently used Windows menus are collected. Click the Charms > Settings. Icon Name Function Description Wireless Network You can connect to a wireless network. Select a wireless network to connect to. Adjusting the Volume You can adjust the volume or mute the sound. Screen Brightness ⦽ ⦽ ENG ⦽ You can adjust the screen brightness. Notice You can set the interval at which an App sends notices.
Using Apps Chapter 2 Using Windows 8 An App refers to an application program (hereafter referred to as an App). In a larger sense, it refers to all the software programs installed on the operating system. Windows 8 provides basic Apps for frequently performed tasks. Starting/Exiting an App Click on an App in the Start screen to activate it. To exit the App 1 2 Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Chapter 2 Using Windows 8 Running Two Apps at the Same Time Adding/Removing an App to/from the Start Screen 1 2 3 4 Click Start screen > right-click your mouse button. Click All Apps at the bottom of the screen to display all the Apps that are currently installed. Select the Apps in the Start screen. Move your mouse pointer to the top of the screen. Your mouse pointer changes to a hand shape.
Using Apps Using the Windows Store If you run the App Store in the Start screen, the Apps in the Windows Store are displayed. However, a Microsoft account is required to purchase App(s) in the Windows Store. Continue after registering your Microsoft Account in the Charms. Chapter 2 Using Windows 8 40 Configuring your Microsoft Account A Microsoft Account allows you to synchronize your settings with other device(s) running Windows 8 online allowing you to share file(s) or settings.
Windows Hot Key Function You can use the following convenient hot keys in Windows 8. Function Hot Keys Function Description Displaying the Start Screen Windows Key Displaying the Desktop Windows Key + D Switches to Desktop mode. Running the Charms Windows Key + C Activates the Charms. Locking the Screen Windows Key + L Locks the screen. Opening the Ease of Access Center Windows Key + U Opens the Ease of Access Center configuration.
Chapter 3.
Keyboard Chapter 3. Using the computer Shortcut key functions and procedures are discussed in the following sections. •• The keyboard image may differ from the actual keyboard. •• The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Shortcut Keys Press both the Fn key and hot key at the same time. Alternatively, press the Fn Lock key as well as a hot key to use the hot key functions more easily.
Keyboard Shortcut Keys Chapter 3. Using the computer Name Settings Screen Brightness Control LCD/External Monitor Touchpad Mute Volume Control Keyboard Backlight Brightness Control (Optional) Silent Mode Airplane Mode Function The Samsung software control program, the Settings, is launched. Controls the screen brightness. Switches the screen output to the LCD or external monitor when an external monitor (or TV) is connected to the computer. Turns the Touchpad function on or off.
Keyboard Chapter 3. Using the computer Other Function Keys (Optional) •• Performs the right-click mouse function (touchpad). + •• If you press the Fn Lock key, you can use the hot key functions without pressing the Fn key. If the hot keys do not work properly, you have to install the Settings.
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Chapter 3. Using the computer 46 Click Function Place a finger on the touchpad and click on an item once. Alternatively, press the left button once quickly and release it. •• Touch the touchpad with your fingers only. Anything other than your fingers, such as a ball-point pen, will not be recognized by the touchpad.
Touchpad Chapter 3. Using the computer Right Button Function 47 The Gesture Function of the Touchpad (Optional) This corresponds to clicking the right mouse button. Press the right touchpad button once. The corresponding pop-up menu appears. áᔪ the The Touchpad Gesture function may not be provided and version of the function may differ depending on the model. Some usage procedures may differ depending on the version.
Touchpad Chapter 3. Using the computer The Scroll Function Charms Menu Activating Function This function is the same as the scroll area of the Touchpad. If you place your finger on the right edge of the touch pad and drag your finger toward the center, the Charms menu appears. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right accordingly.
Touchpad Last Run Window Opening Function Place your finger on the left edge of the touch pad and drag your finger towards the center to activate a previously operating program from among the currently running programs. Chapter 3. Using the computer 49 Touchpad On/Off Function Locking with shortcut keys If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the Alternatively, press the + key and then press the keys.
External-type CD drive (ODD, To be purchased) This computer supports an external USB CD-ROM drive (can be additionally purchased). Check if the interface type of the external CD-ROM drive is a USB type. For detailed specifications, refer to the catalog. Chapter 3. Using the computer Connecting the CD Drive Connect the CD drive to the USB port. •• Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed.
External-type CD drive (ODD, To be purchased) Inserting and Ejecting a CD 1 Press the Eject button of the CD drive. Status Indicator Emergency Hole Eject Button 2 When the CD tray opens, insert a CD or DVD and push the tray in until it clicks. 3 Push the CD tray inward until it clicks. The CD drive status indicator is turned on. •• A CD drive’s reading and writing speed may differ depending on the condition and type of the media.
Multi Card Slot (Optional) Chapter 3. Using the computer Using the multi-card slot, you can read and write data on various types of memory cards. Micro SD / SD slot, *micro SD (T-Flash), *micro SDHC, *micro SDXC, *micro SDXC UHS-I, SD, *mini SD, SDHC, *mini SDHC, SDHC UHS-I, SDXC, SDXC UHS-I When you insert a memory card, make sure to insert the memory card in the correct direction. Pushing an incorrectly inserted memory card may damage the card itself or the slot.
Multi Card Slot (Optional) Chapter 3. Using the computer 53 1 Insert a memory card into the multi-card slot in the correct direction. To remove a memory card 2 The following message appears on the top right. Alternatively, push the tip of the card in and then remove it once it pops up. Click to open the folder and click View Files. If a message appears to notify you of any problem, click the corresponding window > Continue without Scanning. You can perform the following process described in No. 3.
Multi Card Slot (Optional) To format a memory card When using the memory card for the first time, you must format the card before using it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. 1 Click the Windows Explorer Desktop. 2 Right-click over a card drive with the touchpad and select Format. 3 Click Start to the formatting. icon in the taskbar on the Chapter 3.
Connecting an External Display Device Chapter 3. Using the computer 55 If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. Connect an external monitor, TV, or projector that supports the D-SUB interface to display the image on a wider screen. You can connect a D-SUB monitor or HD device using a micro HDMI cable.
Connecting an External Display Device 2 áᔪ Connect the power cord of the connected monitor, TV or projector and turn the power on. Ŗᮁ Change your TV to external device mode when connecting to the TV. Chapter 3. Using the computer 56 Alternatively, to set up dual view: Open the Display Settings window in the Control Panel, select Monitor 2 and select the Expand to fit to this monitor checkbox to set dual view. For more detailed information, refer to the Windows online help.
Ŗᮁ Connecting an External Display Device Chapter 3. Using the computer 57 ᯲ 1 Connect the HDMI to micro HDMI cable to the HDMI port of the TV. External Monitor 2 Select Charms menu > Devices Select a desired3& ִփ monitor mode. > Second Screen. ᰆ⊹ 3& ִփ TV Projector PC3& ִփ screen only ᖅᱶ 3& ִփ The contents are only displayed on the PC monitor (current device).
Connecting an External Display Device Using multiple displays (Optional) You can connect and use two displays devices by connecting them to the monitor and the Micro HDMI ports respectively. This function is supported for 13.3 inch Intel® HD Graphics 4000 models. You can check if this feature is available by selecting Computer > System Properties > Device Manager > Display adapters and confirming that the display adapter is an Intel® HD Graphics 4000.
Adjusting the Volume Chapter 3. Using the computer You can adjust the volume using the keyboard and the volume control program. Adjusting the Volume using the Keyboard + or Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below. + 1 key combination to 2 Right-click over the Volume icon Recording Device. 3 Check if the microphone is set as the default recording áᔪ device. áᔪ Alternatively, press the + turn the volume on or off.
Adjusting the Volume Using SoundAlive (Optional) The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. áᔪ •• SoundAlive is only supported in Windows 8. •• The software programs provider may vary, depending on your computer model. Ŗᮁ •• In addition, some pictures may differ from actual product depending on the computer model and software version. 1 ᯲ Right-click over the Volume and click Play Device.
LCD Brightness Control Chapter 3. Using the computer The screen brightness is automaticallyáᔪset to the brightest level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time.Ŗᮁ ᯲ Controlling the Brightness Using the Keyboard ᰆ⊹ 1 2 Click the Charms menu > Settings Adjustment icon . > Screen ᖅᱶ Adjust the brightness with the screen brightness control bar.
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. Chapter 3. Using the computer 2 Connect the LAN cable to the connected LAN adapter. •• You can use wired LAN by using the LAN adapter (Optional). áᔪ •• Since these descriptions are written on the basis of the latest operating system, Windows 8, some of the content and the figures of the descriptions may differ depending on the operating system.
Wired Network 4 Select Ethenet and click the right button of the touch pad and select Properties. Chapter 3. Using the computer 5 63 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. The LAN Device name may differ depending on your computer’s Network Device. •• The Network Component name may differ depending on the Operating System Installed. •• To add a network component, click Install in the screen shown in the figure above.
Wired Network 6 áᔪ Chapter 3. Using the computer 64 Ŗᮁ Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. Using the WOL (Wake On LAN) function ᯲ is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN).
Wired Network For Windows 8, Wake On LAN is not supported by Ping. When connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN. This happens because when the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communication between multiple computers at home or a small-size office through wireless LAN devices. Chapter 3. Using the computer 66 •• The screen figures and terms may differ depending on the model. •• Depending on the program version, some functions may not be provided or different functions may be provided.
áᔪ Wireless Network (Optional) Chapter 3. Using the computer 67 Ŗᮁ Connecting to a Wireless LAN ᯲ 2 If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. Click Connect. If a network key is set for the AP, enter the network key and then click OK. ᰆ⊹ 1 For the network key, please ask your network administrator. If you click the Charms menu > Settings > Network Connections icon, a list of available APsᖅᱶappears.
᯲ Mobile broadband (Wireless WAN, Optional) Chapter 3. Using the computer 68 ᰆ⊹ A wireless wide area network (WWAN) is a mobile broadband network that is available in mobile phone service areas. 1 Click Charms > Settings > Network to display available ᖅᱶ mobile broadband networks as shown below. •• The descriptions below are for computer models with mobile broadband devices. A mobile broadband device is optional.
Using the TPM Security Device (Optional) A TPM (Trusted Platform Module) security device is a security solution that protects your personal information by saving the user authentication data on the TPM chip installed on the computer. To use the TPM security device, you have to initialize the TPM chip in the BIOS Setup, initialize the TPM program, and then register the user. •• This function is only supported for models with TPM (security chip). Chapter 3.
Using the TPM Security Device (Optional) Initializing the TPM chip 2 When you use the TPM function for the first time or you want to register the user again, you have to initialize the TPM chip. 1 If the BIOS screen appears, select the Security > TPM Configuration item and press Enter. SysInfo •• Initializing the TPM chip erases all authentication information saved on the TPM chip. Any decision to initialize must be taken carefully.
Using the TPM Security Device (Optional) 5 6 7 When the system reboots, press the corresponding key(s) by following the onscreen instructions. When the computer restarts automatically and the Samsung logo screen appears, press the F2 key repeatedly. Chapter 3. Using the computer Installing the TPM program You can install the TPM program as follows. Install the program according to the procedures below. This program is only provided for models with Recovery and the TPM function.
Using the TPM Security Device (Optional) Method 2 1 Turn the computer on and immediately press the F4 key several times. 2 After a moment, the Recovery program runs. 3 When a pop-up window appears to ask you to reboot the system, click Yes. 1 From the Start Screen, right-click any area and select All apps in the bottom right corner. Then, click Infineon Security Platform Solution > Security Platform Management > User Settings.
Using the TPM Security Device (Optional) 3 4 5 Select a Security Platform Feature and set a basic user password. Chapter 3. Using the computer Using the TPM program For more information about using the TPM program, refer to the online help for the program. Complete the registration according to the instructions. The user registration for the TPM program has been completed.
Using the TPM Security Device (Optional) 2 If the Confirm Attribute Changes window appears, select the range to apply the encryption to and click OK. (This dialog box only appears when the folder is encrypted.) 3 4 If the current operating system is Windows 8/7, the user account control window appears. In this case, click Continue. Chapter 3. Using the computer In the user authentication window, enter the Basic user password you entered when registering the user and click OK.
Using the TPM Security Device (Optional) Chapter 3. Using the computer 75 Opening an encrypted folder (file) Using the virtual drive (Personal Secure Drive: PSD) 1 2 The virtual drive (PSD) is a virtual space to save and manage confidential data. In the created virtual drive (PSD), you can create files and folders as with a normal drive (e.g. drive C:) and you can use confidential data saved on another drive by copying the data to the virtual drive (PSD). 3 Double-click an encrypted folder (file).
Using the TPM Security Device (Optional) When the virtual drive (PSD) is not loaded To use the virtual drive (PSD), the virtual drive (PSD) should be loaded first. If it is not loaded, you can load it according to the procedures below. 1 Right-click over the Security Platform icon in the system tray of the Taskbar and select Personal Secure Drive > Load from the pop-up menu. 2 In the load window, enter the basic user password and click OK.
Using the TPM Security Device (Optional) Deleting the virtual drive If a virtual drive has been created, you have to delete the virtual drive before deleting the existing authentication information saved on the TPM chip. 1 2 3 4 5 6 7 Right-click over > Create/Manage. Enter the password that you entered when registering the TPM program and click Next. Select Delete selected PSD and click Next.
Using the Multimedia App (Optional) You can enjoy photo, video and music files with the S Camera, S Gallery and S Player apps. S Camera You can take photos and record videos with the S Camera app, and view them directly in this app. S Gallery Only photos or videos recorded with the S Camera app can be viewed with the S Camera app. S Player You can view the photo, video and music files saved on the computer.
Using the Multimedia App (Optional) Chapter 3. Using the computer 79 áᔪ 2 Using the S Camera app Ŗᮁ 1 Tap Charm menu > Start To make a video recording, slide the camera mode bar to the Video position. > S Camera. ᯲ Camera mode (Photo To take a picture, slide the camera mode bar into the Photo position. , Video ) ᰆ⊹ 3 4 ᖅᱶ Tap on Take a picture/Record a video to take a picture or record a video. You can view the picture or video using the Picture preview or S Gallery app.
Using the Multimedia App (Optional) Chapter 3. Using the computer áᔪ Editing a photo Using the S Gallery app Ŗᮁ 1 2 Tap Charm menu > Start > S Gallery. ᯲ You can view the pictures and videos taken by the S Camera. ᰆ⊹ In addition, you can apply special effects to the pictures using the photo editing function. ᖅᱶ You can take a picture in the S Gallery app by tapping the Camera icon. 1 Select Picture preview. Drag it upward slightly from the bottom center.
Using the Multimedia App (Optional) Chapter 3. Using the computer áᔪ 2 Select an effect to be applied to the photo. Using the S Player app Ŗᮁ E.g. If you select Draw Line preview Color Undo 1 Tap Charm menu > Start > S Player. ᯲ My Music ᰆ⊹ My Videos My Photos ᖅᱶ Erase/Draw Line thickness Save Close Frame Draw Stamp Music playlist 2 Slideshow My photo list Select a menu to enjoy photo, video and music files. Some files may not be played depending on their format.
Samsung Software Update SW Update is a software program that searches for Samsung software programs and drivers installed when you purchased the computer and helps you update any drivers or programs. Chapter 3. Using the computer 3 The SW Update program runs. Select the items that you want to update before proceeding with the update process. •• You can check updatable files before performing the update only when you are connected to the internet.
Diagnosing the Computer Status and Troubleshooting The Support Center program, which is Samsung’s computer’s troubleshooting guide, supports diagnosing the system and has a FAQ for frequently occurring problem(s). 2 1 Then, click Support Center. 83 Support Center is activated and starts diagnosing your computer. After the diagnosing process is finished, the System Status menu displays a list of the current problems to be solved as shown.
Chapter 4.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. •• Use the BIOS setup to define a boot password, change the booting priority, or add a new device. •• Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. •• The functions of the BIOS setup are subject to change for product function enhancement purposes. •• The BIOS Setup menus and items may differ depending on your computer model. Chapter 4.
BIOS Setup Chapter 4. Settings and Upgrade 86 System BIOS Setup Keys The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. Setup Menu Help Help for the selected item appears automatically. Setup Items Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Advanced Using this menu, you can configure the major chipsets and additional functions.
Setting a Boot Password Chapter 4. Settings and Upgrade 87 If you set a password, you have to enter the password when you turn the computer on or enter the BIOS Setup. 1 Select the Security menu in the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. 2 In the Set Supervisor Password item, press . 3 Enter a password, press , re-enter the password for confirmation, and press again.
Setting a Boot Password Setting a User Password Using the User Password, you can turn the computer on but you cannot change the major settings of the BIOS Setup because you cannot enter the BIOS Setup. This helps prevent unauthorized access to the major settings in the BIOS Setup menu. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
Setting a Boot Password Deactivating the Password 1 Press on the password to be deactivated. For example, to deactivate a supervisor password in the Set Supervisor Password item, press . 2 In the Enter Current Password item, enter the currently configured password and press . 3 Leave the Enter New Password item field empty, and press . 4 Leave the Confirm New Password field empty, and press . The password is deactivated.
Changing the Boot Priority As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. Chapter 4. Settings and Upgrade 3 90 Press the down key (↓) to move to the SATA HDD item and press the F6 key to move up to the top item. Boot Menu The screen images and terms may differ from actual product depending on the computer model and driver version. [Boot Priority Order] 1. SATA CD : XXXXXXXXXXXX 2.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Precautions •• Users cannot remove or replace the internal battery. •• To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. •• Use only chargers specified in the User Manual.
Battery Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge. Chapter 4. Settings and Upgrade 92 Battery Usage Time Information A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened.
áᔪ áᔪ Battery Chapter 4. Settings and Upgrade 93 Ŗᮁ Ŗᮁ Using the power management program Extending the Battery Usage Time ᯲ ᯲ This program helps you use the battery more efficiently and supports the power mode optimized for the operating environment. Decreasing the LCD Brightness ᰆ⊹ ᰆ⊹ 1 2 Click the Charms menu > Settings Adjustment icon . > Screen ᖅᱶ 1 Alternatively, right-click the power measuring device icon in the notification area of the taskbar and select Power Options.
Battery Using the Battery Calibration Function When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. Chapter 4. Settings and Upgrade 3 In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again.
Chapter 5.
Recovering/Backing up the Computer (Optional) If a problem occurs with your computer, Recovery (recovery program) allows you to easily restore your computer to the default (factory) settings. Alternatively, you can back up your computer so that you can restore it to your preferred state at any time. Chapter 5. Troubleshooting •• Recovery may not be provided or may be a different version depending on the model. •• Some functions may differ slightly or be excluded depending on the version.
Recovering/Backing up the Computer (Optional) Recovering 3 You can restore the computer settings to the factory default settings if the computer fails to boot up, or if you encounter a serious problem with the computer. 1 Chapter 5. Troubleshooting If the initial menu screen appears, click Recover. Select a recovery point and click Recover. If you set the User Data Maintenance to ON, the computer is restored while maintaining the current user data.
Recovering/Backing up the Computer (Optional) Recovering after a Backup 2 You can recover your computer after you have backed up your computer to a separate drive or external storage device. Chapter 5. Troubleshooting 98 Click Backup in the Recovery Home screen. Select the drive to save and click Backup. You cannot select a DVD drive. Backing up 1 To back up your computer to an external storage device, connect the external storage device and select the relevant drive. Select the drive to save to.
Recovering/Backing up the Computer (Optional) Recovering You can recover your computer using the backup from the above process. 1 2 3 If the backup image is saved to an external storage device, connect the device. Start Recovery and click Recover. Select a Recover Option and click Recover. Select a point to recover. 4 Chapter 5. Troubleshooting 99 The recover is performed based on the screen instructions. You can use your computer after the recover is completed.
Recovering/Backing up the Computer (Optional) Chapter 5. Troubleshooting 100 To copy the external storage disk When you replace a storage device such as the HDD, SSD, etc. (hereafter referred to as a hard disk) built into your computer, you can move your existing data to the new storage device easily and safely. The new storage device must have sufficient capacity to save your existing data. You need to purchase an external hard USB connector separately to connect the hard disk and your computer.
Recovering/Backing up the Computer (Optional) Export Disk Image Function If you frequently recover your computer to the default (factory) settings, you can conveniently recover your computer after exporting the default (factory) status disk image to an external storage device. 1 2 3 Connect the external storage device, and then select a drive to save to. Click Run. Perform the process by following the instructions to completely save the default (factory) status disk image to the external storage device.
Recovering/Backing up the Computer (Optional) Computer Recovery Function in Windows 8 If a problem occurs with your computer, the recovery program allows you to restore your computer to the default settings. For models where the SSD is less than 64GB, use the Windows System Restore function instead of the Recovery program. 1 Click the Charms menu > Settings > Change PC Settings > General. 2 Click the Start button for Refresh.... or Remove..... Refresh....
Reinstalling Windows (Optional) You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly. (For models supplied with a SYSTEM RECOVERY MEDIA.) For models supplied with the Recovery, you can reinstall Windows using the Recovery. These descriptions are for Windows 7/8 and Windows Vista and for supported models only. Chapter 5. Troubleshooting Reinstalling in Windows 1 2 •• A SYSTEM RECOVERY MEDIA may not be supplied depending on your computer model.
Reinstalling Windows (Optional) 4 The following window appears, select an installation option. If you click Custom, the procedures from Step 5 continue sequentially. If you click Upgrade, the procedures from Step 6 continue sequentially. Chapter 5. Troubleshooting 5 •• Upgrade Select this option to Upgrade Windows while maintaining current files, configurations and programs.
Reinstalling Windows (Optional) Chapter 5. Troubleshooting Reinstalling when Windows does not start When Windows does not start, boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows. 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer. 2 If the Press any key to boot from CD or DVD... message appears while booting, press any key on the keyboard. 3 4 For Windows 7/8, this screen may not appear depending on the version.
Q&A Chapter 5. Troubleshooting You can look for potential problems that may occur with the system and view the relevant solutions. Also, you may look up any reference(s) required while operating the computer. than the actual capacity because some programs occupy a certain area of the HDD outside of Windows.
Q&A Chapter 5. Troubleshooting 107 Windows 8 Related Q1 A I cannot find the Start button on the Desktop. There's no Start button in Windows 8. Q4 A You can use the Control Panel, PC-running menu(s), etc. by activating the Charms menu. Q2 A A Currently, there is no way to set the Desktop to appear by default. Press the Windows key + D key simultaneously to reveal the Desktop when the Start screen appears. This is currently the only workaround. I cannot find the computer's Shutdown button.
Q&A Q7 A How can I change the screen settings, environment settings, type size, color, and so on? Click Charms menu > Settings > Change PC Settings > Personalization. You can set the OS settings such as the screen design, etc. To configure your computer in detail, click the Charms menu in Desktop > Settings > Control Panel. You can configure your computer in the same way as existing Windows systems. Q8 A Active X does not run in Internet Explorer on the Start screen.
Q&A Display Related Q1 A The Desktop displayed on the TV after connecting via the HDMI port does not fit the screen. Go to the Graphics Control Panel to adjust the screen settings. Chapter 5. Troubleshooting Sound Related Q1 A Right-click over the Desktop and go to Graphics Properties > Display > General. Adjust the Horizontal Ratio and Vertical Ratio settings to fit your screen and click OK. 1.
Chapter 6.
Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system.
Important Safety Information Chapter 6 Appendix 112 Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information.
Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network.
Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Regulatory Compliance Statements Health and safety information Exposure to Radio Frequency (RF) Signals Certification Information (SAR) Chapter 6 Appendix 119 SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment complies with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment.
Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.
Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands.
Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum.
Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
Regulatory Compliance Statements Brazil Chapter 6 Appendix 125 European Directives Este produto esta homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolucao 242/2000, e atende aos requisitos tecnicos aplicados.
Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
Regulatory Compliance Statements Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Samsung déclare que l’appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF. Türkiye [Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
Regulatory Compliance Statements Chapter 6 Appendix The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz.
Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC.
WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 6 Appendix 131 Correct disposal of batteries in this product Pb (Applicable in countries with separate collection systems) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Samsung Packaging Take-Back Program In partnering with select recyclers, Samsung offers packaging take-back at no cost to you. Simply call the following number for the locations nearest you. CRT Processing, LLC (877) 278-0799 Kathy Severson – Logistics contact Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.
TCO Certified (for corresponding models only) Congratulations! Félicitations ! This product is TCO Certified for Usability and the Environment. The product you have just purchased carries the TCO Certified label. This means that your computer is designed, manufactured and tested according to some of the strictest performance and environmental criteria in the world.
Product Specifications Chapter 6 Appendix 134 The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. CPU (Optional) Intel Core i3/i5/i7 Processor Main Memory Memory type: DDR3 SDRAM •• Optional components may not be provided or different components may be provided depending on the computer model. Main Chipset (Optional) Intel HM65 / HM75 •• The system specifications are subject to change without notice.
Product Specifications Registered Trademarks Chapter 6 Appendix ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Samsung is a registered trademark of Samsung Co., Ltd. Intel, Core are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation.
Glossary Chapter 6 Appendix 136 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators.
Glossary Chapter 6 Appendix 137 DVD (Digital Versatile Disk) Icon DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. This refers to a small image that represents a file that users can use.
Glossary Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Chapter 6 Appendix 138 PCMCIA( Personal Computer Memory Card International Association) card This is an extended card slot specification for mobile computers such as a notebook computer.
Glossary Chapter 6 Appendix 139 SDXC (Secure Digital eXtended Capacity) TCP/IPv4 SDXC provides a higher capacity and speed than the SDHC specification. This is a new SD card specification that can theoretically implement a memory capacity up to 2TB. This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. For high capacity implementation, apply the exFAT specifications.
Index Chapter 6 Appendix A AP M 66 B Monitor Connection / Output 55 Multi Card Slot 52 Battery 91 O BIOS Setup 85 Overview Booting Priority 90 C CD Drive 50 Charge 91 Click 46 D Product Specifications Dual View 56 Safety Precautions Support Center 83 SW Update 82 Touchpad User Password 46 6 Scroll 48 Shortcut Key 43 Status Indicators 25 88 V Volume Control 96 S 61 134 Recovery 47 LCD Brightness 87 59 Drag 87 U Recorder 46 L 24 R Double-Click Superv