User Manual (Vista)

157
Upgrading Memory
Oneormorememorymodulesareinstalledonthecomputer.
Thereare2memoryslotsanduserscanreplacetheinstalledmemoryoraddnewmemory.
Before You Start!
■
Replaceorinstallnewmemoryonlyaftershuttingthecomputerdowncompletely.Donotreplaceorinstallmemorywhenthe
computerisinSleepmode.
■
Disconnectmainpowerplugandremovethebatterybeforecontinuing.
■
Toutilizethedualchannelfeature,usingmemorymoduleswiththesamespecications(ofthesamecapacityandfromthesame
manufacturer)isrecommended.
■
OnlyusethesametypeofmemoryasspeciedintheProductSpecication.
Fixing Screw
Adding a Memory Module
1
 Removethescrewonthememorycompartment
coveratthebottomofthecomputerusingascrew
driver.
2
 Insertanewmemorymoduleintothememoryslotat
anangleofapproximately30degreesaligningitto
theangleofthememoryslot.
Memory Slot