User Manual (Vista)

194
4
Enter a description for the backup regarding the
currentcomputerstatusintheDescriptioneldso
that you can easily recognize it later, and specify the
Save Path. If your computer has a DVD-Writer, you
can specify the DVD drive as the Save Path.
SelectDriveD.
SelecttheDVDdrive.
5
If you click the Next button, the system restarts in
restoration mode and the Complete Backup begins.
If you have selected the DVD drive as the Save Path,
the “Enter a blank DVD” message appears. Insert a
blank DVD and click the OK button.
Samsung Recovery Solution supports DVD+R, DVD-R,
DVD+RW, and DVD-RW, but does not support CD-R,
CD-RW,DVD-RAM,DVD-DL(DualLayer),HD-DVD,
and Blu-Ray.
6
The Complete Backup begins. If multiple DVDs are
required,theexpectednumberofDVDsisdisplayed
in the progress screen. Whenever burning a DVD
iscompleted,the“InsertthenextDVD”message
will appear. Continue the backup according to the
instructions.
7
When the ‘Restart the System’ message appears after
the backup is complete, click OK to restart the system.
 Complete Restore
1
–WhenbackingupontoDVD
Turn the computer on and insert the backup DVD
into the DVD drive.
 IftherearemultiplebackupDVDs,inserttherst
DVD.
– When backing up to another drive
Proceed to Step 2.
2
Click Start > All Programs > Samsung >
Samsung Recovery Solution > Samsung
Recovery Solution.
When you cannot start Windows, turn the computer
on and press the F4 key in the boot screen to enter
restoration mode.
3
When the initial menu screen appears, click Restore
and then click Complete Restore.
4
Select a Complete Backup restoration point in the
restoration point selection screen and click the Next
button. The system is restarted.
5
The restoration progress message appears after the
computer boots up in restoration mode. If you click
OK, the restoration begins.
If multiple DVDs have been used for a Complete
Backup, whenever burning a DVD is completed, the
“InsertthenextDVD”messagewillappear.
6
When the ‘Restart the System’ message appears
after the restoration is complete, click OK to restart
the system. The Complete Restore has been
completed.