User Manual (Vista)

199
Q
HowcanIreceiveaFAXinSleepmode(Standby
Mode)?
A To receive a FAX when the computer is in Sleep
Mode (Standby Mode), the computer must be
conguredasfollows.
The
FAXprogrammustbeconguredsothatit
receives FAXES automatically referring to the FAX
program manual.
 Click Start > Control Panel > Hardware and
Sound.
 Click on Phone and Modem Options.
 In the Modem tab, select an installed modem
and click Properties.
In the Power Management tab of the Modem
Properties window, select the Wake up the
computer with this device option and click the
OK button.
(If the Power Management tab does not
appear, select Change Settings in the
General tab.)
Whenthemodemisconguredasabove,andaFAX
arrives, the computer wakes up from Sleep Mode
and receives the FAX.
Q The <Wake On LAN> function
A1 <Wake On LAN> is a function that activates the
system from Sleep mode when a signal (such as
a ping or magic packet command) arrives over the
network (wired LAN).
Usingthe<WakeOnLAN>Function
 Click Start > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
 Right-click on the Local Area Connection and
select Properties.
 Click Congure > Power Management
tab. Select Allow this device to bring the
computer out of standby, then click OK.
Restart the system.
—
 If the system wake up from Sleep mode even
though there is no received signal, use the
system after disabling the <Wake On LAN>
function.
—
 The LAN LED may not be turned off if System is
shutdown without disabling the WOL (Wake on
LAN) option.
—
 Connecting a wired LAN while using a wireless
LAN may not activate the <Wake On LAN>
function. Set the Wireless LAN to Disable to use
the <Wake On LAN> function.
Wired Network (LAN) Related