User Manual (Vista)

100
5
 SelectDirect ConnectionandclicktheNextbutton.
6
 SelecttheLANdevice,setuptheIPaddressand
clicktheNextbutton.
7
 ClickAdd Printer and set up a printer according to
thewizard.Whentheprinterhasbeenadded,click
the Refreshbutton,selectthenewlyaddedprinter
andthenclicktheFinishbutton.
Note
Tonotaddaprinter,clicktheFinishbutton.
8
 Whenthenetworksettingsarecomplete,the’Do
you want to move to the newly added location
now?’messageappears.ClicktheCancelbutton.
Aniconfortheaddedlocationiscreated.The
networksettingshavebeencompleted.
Ifyouselect’OK’,thenetworksettingsfortheadded
locationareapplied.
Note
Toaddanewlocation,repeattheproceduresfrom
Step3above.
Select Device
Selectadevicetobeconnected
totheInternet.SelecteitherWired
LANorWirelessLAN.
IP Settings
TouseastaticIPaddress,llintheelds.FortheIP
addressinformation,askyournetworkadministrator.
Obtain an IP address automatically
SelectDHCPtousethisoption(automaticIPsetting).