User Manual (Vista)

132
YouhavetoinitializetheSecurityPlatformafterinstalling
theTPMHostsoftware.
TheproceduresforinitializingtheSecurityPlatformare
describedbelow.
1
 ClickStart > All Programs > Inneon Security
Platform Solution > Security Platform
Management > User Settings.(Alternatively
double-clicktheSecurity Platform( ) icon in the
Taskbar.)
2
 Ifawindowappearsaskingwhetheryouwanttostart
TheInneonSecurityPlatformInitializationWizard,
clickOK.
Inthestartscreen,clickNext.
IftheTrustedPlatformModuleactivationscreen
appears,checkTPMStateintheBIOSsetupandmake
sureTPMStateissettoEnable & Activate.
Forhow
tocheckTPMStateintheBiOSsetup,refertothe
‘InitializingaTPMchip’section.
3
 SelectInitialize a new Security Platformandclick
the Nextbutton.
4
 EnterapasswordandclicktheNextbutton.
Initializing the Security Platform