User Manual

28
General Requirements
The requirements listed below are
applicable to all countries:
■ Thelengthofthepowercordsetmustbe
atleast6.00feet(1.8m)andamaximum
of9.75feet(3.0m).
■ Allpowercordsetsmustbeapproved
byanacceptableaccreditedagency
responsibleforevaluationinthecountry
wherethepowercordsetwillbeused.
■ Thepowercordsetmusthaveaminimum
currentcapacityof7Aandanominal
voltageratingof125or250voltsAC,as
requiredbyeachcountry’spowersystem.
■ Theappliancecouplermustmeetthe
mechanicalcongurationofanEN
60320/IEC320StandardSheetC7
connector,formatchingwithappliance
inletonthecomputer.