User manual

A-7
Appendix
Item Specifications
Physical Dimensions 59.75 X 44.45 mm (Width X Height)
Specifications operation temperature Same as system operation specifications
and humidity Temperature: 0 ~ 70°C, Humidity: less than 85%
Power Saving Mode 135mW
Power Receiving Mode 0.85W
Specification Transmission Mode 1.45W
Power 3.3V
Compatibility IEEE 802.11a, IEEE 802.11b, IEEE 802.11g,
Operating System Microsoft Windows XP, 2000
Network - NDIS5 Miniport Driver
Specifications Media Access Protocol CSMA/CA (Collision Avoidance) with
Acknowledgement (ACK)
Security Wired Equivalent Privacy support (WEP) 64bit/128bit
WPA*, CCX*
■
RF Specifications
R-F Frequency Band 2.4GHz, 5.725~5.825GHz
Support Channels 1~13 channel, 149~161 channel(149, 153, 157, 161)
Device Description Transceiver
Power 5 mW
Transmission Method 11a mode : OFDM
11b mode : DSSS
11g mode : OFDM
Data Rate (Mbps)* 11a mode** : 54, 48, 36, 24, 18, 12, 9, and 6
11b mode : 11, 5.5, 2, and 1
11g mode*** : 54, 48, 36, 24, 18, 12, 9, and 6
Antenna Type Internal Antenna 2 EA (main/aux)
* The data rate may differ from the actual data rate.
** 11a mode is supported only when the device is connected with an IEEE802.11a device (e.g.
IEEE802.11a compatible Access Point).
*** 11g mode is supported only when the device is connected with an IEEE802.11g device (e.g.
IEEE802.11g compatible Access Point).
* This piece of equipment supports the Wi-Fi wireless LAN security standard, WPA (Wi-Fi
Protected Access) and CCX (Cisco Compatible eXtensions). To connect to a wireless network
consisting of the WPA and CCX certificates or PROSet may be required depending on the
network settings. For information on the PROSet installation, refer to P.4-17 ‘Wireless Network
Setup Using the Wireless LAN Setup Program’. For more information, ask your network
administrator.
Intel(R) PRO/Wireless LAN 2915 ABG
Network Connection