User Manual
116
—
Connecting a wired LAN while using a wireless LAN
may not activate the <Wake On LAN> function. Set
the Wireless LAN to Disable to use the <Wake On
LAN> function.
For Windows 7, Wake On LAN is not supported Ping.
Q
When I am connected to a 100Mbps/1Gbps wired
LAN and the computer exits Sleep/hibernation
mode, a message appears informing you of a
connection to a 10Mbps/100Mbps wired LAN.
A When the computer exits standby/hibernate mode,
restoring the network takes about 3 seconds.
When the network is restored, it operates at
100Mbps/1Gbps.
Q
The Home Group function
(for the Windows 7 operating system only)
A
Home Group is a function that enables connecting
all the computers at home allowing users to access
the data on all computers as if accessing the data on
the local computer.
If you set the rst computer to use a Home Group
as a Home Network, you can create a Home
Group. A second (and more) computer can
participate in the created Home Group. A password
is required for participation and you can conrm the
password on the rst computer.
This function is only available between computers
that have the Windows 7 operating system installed.
If an older operating system than Windows 7 is
installed on a computer, the computer cannot create
or participate in a Home Group.
In addition, the Windows 7 Starter version does not
support the Home Group function.