User Manual

During the wireless Ad-Hoc network operation,

the AP (Access Point) is intermittently not

found.

A This problem occurs intermittently during the

wireless Ad-Hoc network operation. Even if this

problem occurs, the wireless Ad-Hoc network

operation is working properly and is not affected.

Click Refresh to update the AP list.

I have set the same IP address for both the

wireless and wired connections, but they do not

work properly.

A You cannot use wireless and wired connections

using the same IP address. To sequentially use

both the wired and wireless connections with the

same IP address, you need to set the currently not

needed connection to Do Not Use in the Network

Connections of the Control Panel.

The wireless LAN does not work properly when

there is a device operating on an adjacent

frequency in the vicinity of the product.

A1 Channel interference may occur when a wireless

video transceiver or a microwave oven is being used.

If you experience channel interference from other

equipment, we recommended changing the channel

for connecting to the AP. For more information about

AP settings, refer to the User Manual supplied by the

AP manufacturer.

A2 Since IEEE802.11g equipment operates in hybrid

mode when there is active IEEE802.11b equipment,

the data rate may be degraded.