User Manual

24
Safety Instructions
Your system is designed and tested to meet the latest
standards for safety of information technology equipment.
However, to ensure safe use of this product, it is important
that the safety instructions marked on the product and in
the documentation are followed.
Always follow these instructions to help guard against
personal injury and damage to your system.
Setting Up your System
 Read and follow all instructions marked on the product
and in the documentation before you operate your
system. Retain all safety and operating instructions for
future use.

Do not use this product near water or a heat source
such as a radiator.

Set up the system on a stable work surface.
 The product should be operated only with the type of
power source indicated on the rating label.

Ensure that the electrical outlet you are using to power
your equipment is easily accessible in case of re or
short circuit.

If your computer has a voltage selector switch, make
sure that the switch is in the proper position for your
area.

Openings in the computer case are provided for
ventilation. Do not block or cover these openings.
Make sure you provide adequate space, at least 6
inches (15 cm), around the system for ventilation when
you set up your work area. Never insert objects of any
kind into the computer ventilation openings.

Ensure that the fan vents on the bottom of the casing
are clear at all times. Do not place the computer on a
soft surface, doing so will block the bottom vents.

If you use an extension cord with this system, make
sure that the total power rating on the products
plugged into the extension cord does not exceed the
extension cord power rating.
Important Safety Information