User Manual

62
To insert a card
1
Insert a card into the slot on the side of the
computer.
2
If you insert a card into the slot, Windows recognizes
the card automatically or a message telling you to
install a driver appears.
If the card is not automatically recognized, install the
device driver supplied with the card.
If a window asking whether you want to scan and
change appears, click on Continue Without Scan.
This will proceed to Step 2 above.
To remove a card
1
Click the Safely Remove Hardware icon on the
task bar.
2
Click Remove ExpressCard.
3
You can remove the express card when the Safely
Remove Hardware message appears.
4
Push the card in the slot lightly.
Then the card pops up.
5
Eject the card.
ExpressCard Slot (Optional)
You can use Express cards using this slot.
The ExpressCard slot can be regarded as the next generation PCMCIA card specication and supports LAN, TV
Tuner and Sound cards. This computer’s slot supports the Express Card/34 specication.
Before You Start!
 Remove the dummy card installed to protect the slot rst. (Optional)
Lightly push the dummy card of the slot. The dummy card pops up. Eject the dummy card.

This slot is a ExpressCard slot. You cannot connect a PCMCIA card here.
 Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the
gures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating
systems are similar, use the computer referring to these descriptions.
ExpressCard Slot