User Manual
74
5
Select Internet Protocol Version 4 (TCP/IPv4)
from the Networking tab and click Properties.
The LAN device driver may differ depending on your
LAN device model.
To add a network component, click Install in the
screen shown in the gure above. You can add
clients, services, and protocols.
6
Congure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select
Use the following IP address, and set the IP
address manually.
When not using DHCP, ask your network administrator
for the IP address.
7
When you have completed the settings, click the OK
button.
The network settings have been completed.