User Manual

84
Setting a Supervisor Password
A Supervisor Password is required to turn the computer
on or to start the System Setup.
When setting a Supervisor Password, users other than a
supervisor cannot use the computer.
1
Select the Security menu in the BIOS Setup.
2
In the Set Supervisor Password item, press
<Enter>.
3
Enter a password, press <Enter>, re-enter the
password for conrmation, and press <Enter> again.
The password can be up to 8 alphanumeric
characters. Special characters are not allowed.
4
When a message conrming the password
conguration appears in the Setup Notice window,
press <Enter>.
The supervisor password has been set.
The supervisor password is required to turn the
computer on or to enter the BIOS Setup.
Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the BIOS Setup.
By conguring a password, you can restrict system access to authorized users only and protect data and les saved
on the computer.
Before You Start!
 Do not lose or forget your password.
 If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.