User Manual

87
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed memory or add new memory.
Before You Start!
 Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.

Disconnect main power plug and remove the battery before continuing.
 To utilize the dual channel feature, using memory modules with the same specications (of the same capacity and from the
same manufacturer) is recommended.

Only use the same type of memory as specied in the Product Specication.
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
2
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
Fixing Screw
Memory Slot