User Manual (FreeDos)

66
Upgrading Memory
One or more memory modules are installed on the computer.
There are 2 memory slots and users can replace the installed memory or add new
memory.
Before You Start!
 Replace new memory only after shutting the computer down completely.
Do not replace memory when the computer is in Sleep mode.
 Disconnect main power plug and remove the battery before continuing.
 To utilize the dual channel feature, using memory modules with the same
specications (of the same capacity and from the same manufacturer) is
recommended.
 Only use the same type of memory as specied in the Product Specication.
 The gures used for the description are of a representative model.
Therefore the gures may differ from the real ones.
 You must use only memory modules with the specications (DDR2 or DDR3) printed
on the memory slot that appears when you open the memory compartment cover at
the bottom.
Adding a Memory Module
1
Remove the screw on the memory
compartment cover at the bottom of
the computer using a screw driver.
2
Insert a new memory module into
the memory slot at an angle of
approximately 30 degrees aligning it to
the angle of the memory slot.
Fixing Screw
Memory Slot
e.g)in the case of using DDR2