Chapter 1. Getting Started Product Features 2 Before You Start 3 Contents 6 Safety Precautions 7 Proper Posture During Computer Use 21 Important Safety Information 24 Replacement Parts and Accessories 26 Regulatory Compliance Statements 28 WEEE SYMBOL INFORMATION 40 Overview 41 Front View Status Indicators Right View Left View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off Bremen_R530_V7_eng.
Product Features High-Performance Notebook Computer Intel Pentium /Core™2 Duo Processor and DDR 3/DDR 2 Memory (Optional) Wireless LAN (Optional) Supports Various Multimedia Functions A video chatting/conference function adopting the camera module (Optional) An HDMI port that enables viewing a full HD picture on the TV (Optional) Easy-to-Use and Convenient Functions Various Hot Key Functions Multi-Card Slot (Optional) Luxurious, Ergonomic Design Optional items may be changed or may not be p
Before You Start Before reading the User Guide, first check the following information. Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. Images used in this User Guide may differ from actual product. This guide decribes procedures for using both the mouse and the touchpad.
Copyright © 2009 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the consent of Samsung Electronics Co., Ltd. The information in this document is subject to change without notice due to improving the performance of the product. Samsung Electronics shall not be liable for any data loss.
Recovery Solution Representation (Optional) Q. What is a Recovery Area? A. – Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Samsung Recovery Solution.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs. - You can either double-click the Samsung Recovery Solution icon on the desktop or press F4 while booting the computer to enter the Recovery Area.
Contents Chapter 1. Getting Started Product Features Before You Start Contents Safety Precautions Proper Posture During Computer Use Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE SYMBOL INFORMATION Overview Front View Status Indicators Right View Left View Left View Back View Bottom View Turning the Computer On and Off Turning the computer on Turning the computer off Chapter 3.
Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may differ from actual products. Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the product in places exposed to humidity such as a bathrooms. There is a danger of electric shock.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Power Related The power plug and wall outlet figures may differ depending on the country specifications and the product model. Do not touch the main plug or power cord with wet hands. There is a danger of electric shock. If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. AC Adapter Usage Precautions Do not bend the power cord excessively or do not place a heavy object over the power cord. It is especially important to keep the power cord out of reach of infants and pets. If the cord is damaged, it may cause electric shock or fire.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Authorized Parts Do not place heavy objects or step onto the power cord or AC adapter to avoid damaging the power cord or AC adapter. If the cord is damaged, there is a danger of electric shock or fire. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Power Off Do not use the computer in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do not use it in a location such as room with floor heating as it may cause the computer to overheat. Take care that the computer vents (on the side or the bottom) are not blocked especially in these environments.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Please charge the battery fully before using the computer for the first time. Take care not to allow metal objects such as a key or clip to touch the battery terminal (metal parts). If a metal object touches the battery terminals, it may cause excessive current flow and it may damage the battery, or result in a fire.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Usage Related Disconnect all cables connected to the computer before cleaning it. If you are cleaning a notebook computer, remove the battery. There is a danger of electric shock or damage to the product. Do not connect a phone line connected to a digital phone to the modem. There is a danger of a electric shock, fire or damage to the product.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Upgrade Related Never disassemble the power supply or AC adapter. There is a danger of electric shock. Use only authorized parts (multiplug, battery and memory) and never disassemble parts. There is a danger of damaging the product, electric shock or fire hazard. Shut down the computer and disconnect all cables before disassembling the computer. If there is a modem, disconnect the phone line.
Warning Failing to follow instructions marked with this symbol may cause personal injury and even fatality. Custody and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). When carrying the notebook computer with other items, such as the adapter, mouse, books etc, take care not to press anything against the notebook computer.
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Installation Related Battery Usage Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Dispose of worn-out batteries properly. Damage to a component within the computer may cause electric shock or fire. The battery disposal method may differ depending on your country and region. Dispose of the used battery in an appropriate way.
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of fire. Use a wall outlet or multi-plug with a grounding part. Failing to do so may cause electric shock hazard. Make sure to have the product tested by a safety service engineer after repairing the product. Authorized Samsung Repair Centers will carry out safety checks after a repair.
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center. If your computer is a notebook computer, make sure to remove the battery. Emergency disk eject method using paperclip should not be used while the disk is in motion. Make sure to use the emergency disk eject method only when the Optical Disk Drive is stopped.
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. Never disassemble or repair the product by yourself. The device may be damaged or you may be injured. There is a danger of electric shock or fire. Custody and Movement Related When moving the product, turn the power off and separate all connected cables first. The product might be damaged or users may trip over the cables.
Caution Failing to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk. Take extra care, because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive.
Proper Posture During Computer Use Maintaining a proper posture during computer use is very important to prevent physical harm. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused.
Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the figure. 50c m Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. Avoid setting the monitor and LCD excessively bright. Keep the monitor and LCD screen clean. If you wear glasses, clean them before using the computer.
Volume Control (Headphones and Speakers) Use Time (Break Time) Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Check your volume first to listen to music. Illumination Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. Indirect illumination is recommended. Use a curtain to prevent reflection on the LCD screen.
Important Safety Information Safety Instructions Openings in the computer case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the computer ventilation openings. Ensure that the fan vents on the bottom of the casing are clear at all times.
Care During Use The Instruction On Safety Operation of NotePC Do not walk on the power cord or allow anything to rest on it. Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer.
Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas.
Power Cord Requirements Connect and Disconnect the AC adapter The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider.
Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/ 5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections).
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11ABGN (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication.
United States of America USA and Canada Safety Requirements and Notices Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. Do not touch or move antenna while the unit is transmitting or receiving.
Unintentional Emitter per FCC Part 15 If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices.
Intentional emitter per FCC Part 15 Wireless devices are not user serviceable. Do not modify them in any way. (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices.
FCC Part 68 (If fitted with a modem device.) The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment (Modem) for repair or warranty information, please contact your local distributor.
Canada Unintentional Emitter per ICES-003 The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical.
This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the installed Bluetooth transmitter. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
European Union European Union CE Marking and Compliance Notices European Radio Approval Information Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark .
EU R&TTE Compliance Statements Česky [Czech] Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Samsung erklærer herved, at følgende udstyr Notebook PC overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Slovensko [Slovenian] Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] Samsung týmto vyhlasuje, že Notebook PC spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] Samsung vakuuttaa täten että Notebook PC tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
European Telecommunication Information General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. The low band 5.15 - 5.35 GHz is for indoor use only. (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/EC.
WEEE SYMBOL INFORMATION orrect Disposal of This Product C (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Overview Before You Start! Optional items may be changed or may not be provided depending on the computer model. The actual color and appearance of the computer may differ from the pictures used in this guide. Front View 1 9 2 3 8 4 7 5 6 1 2 3 4 Camera Lens (Optional) Using this lens, you can take still pictures and record video. Speaker A device used to generate sound. Power Button Turns the computer on and off. Keyboard A device to enter data by pressing the keys.
Status Indicators 1 2 3 4 5 1 Caps Lock This turns on when the Caps Lock key is pressed allowing capital letters to be typed without holding the Shift button down. 2 HDD/ODD This turns on when the hard disk is or ODD being accessed. 3 Wireless LAN This turns on when the wireless LAN is operating. 4 Charge Status This shows the power source and the battery charge status. Green: When the battery is fully charged or the battery is not installed. Red: When the battery is being charged.
Right View 1 1 CD Drive(ODD) (Optional) 2 USB Port 2 Plays CD or DVD titles. Since an ODD(Optical Disk Drive) is optional, the installed drive depends on the computer model. You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. 43 Bremen_R530_V7_eng.
Left View Either type A or B is provided depending on the model. ► Type A Model 1 1 2 3 4 5 2 3 4 5 6 7 8 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. DC Jack A jack to connect the AC adapter that supplies power to the computer. Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. Wired LAN Port Connect the Ethernet cable to this port.
Left View ► Type B Model 1 1 2 3 4 5 2 3 4 5 6 7 8 9 10 Security Lock Port You can connect a Kensington lock to the Security Lock Port to prevent the computer from being stolen. DC Jack A jack to connect the AC adapter that supplies power to the computer. Monitor Port A port used to connect a monitor, TV or projector supporting a 15pin D-SUB interface. Wired LAN Port Connect the Ethernet cable to this port.
Back View 1 1 Battery 2 This is a Lithium-Ion rechargeable battery that supplies power to the computer. The internal heat of the computer is emitted through these holes. 2 Fan Vents If the vents are blocked the computer may overheat. Avoid blocking the vents as this may be dangerous. 46 Bremen_R530_V7_eng.
Bottom View 1 2 3 1 2 3 Battery Latches The latch used to remove or install the battery. Memory Compartment Cover The main memory is installed inside the cover. Hard Disk Drive Compartment Cover The hard disk drive is installed inside the cover. 47 Bremen_R530_V7_eng.
Turning the Computer On and Off Turning the computer on 1 Install the battery and connect the AC adapter. 2 Lift the LCD panel up. 3 Press the Power button to turn the computer on. 4 Power button LED is lit while the computer is turned on. LED If you press and release the Power button on the computer when it is on, the computer enters Sleep mode. When running the computer on battery power, the LCD brightness is dimmed automatically to save battery power. Press the Fn+ brightness.
Turning the computer off Since the procedures to turn the computer off may differ depending on the installed operating system, please turn the computer off according to the procedures for the purchased operating system. 1 Click the Start 2 ▶ For Windows 7 Click Shut down computer. button on the taskbar. ▶ For Windows Vista lick on Start C > and then click on Shut Down as shown in the figure below to shut the computer down.
Chapter 2.
Keyboard Shortcut key functions and procedures are discussed in the following sections. The keyboard image may differ from the actual keyboard. The keyboard may differ depending on your country. The following mainly describes the shortcut keys. Either type A or B is provided depending on the model. 51 54 55 57 59 60 Shortcut Keys You can use the following functions by pressing the keys below with the Fn key.
Fn+ Name Samsung Support Center Function System diagnosis, recovery and Internet consultation program, Samsung Support Center, will be launched. (Optional) For some models, Samsung Magic Doctor is launched You can select operation mode when you need maximum system performance or lownoise/low power consumption with one-click. Silent: Low-noise and low power consumption mode Normal: Normal Mode Easy SpeedUp Manager Speed: Maximum performance mode.
Screen Brightness Control To adjust the LCD brightness press the Fn + key combination or the Fn + key combination. The changed screen brightness is displayed at the center of the screen for a moment. Volume Control To control the volume, press the Fn + key combination or the Fn + key combination. You can mute the sound or cancel the mute function by clicking the Fn + key combination. Numeric Key You can use the numeric keys by pressing the Num Lock key.
Touchpad The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of the left and right buttons of a mouse. Before You Start! Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad. If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended. Either type A or B is provided depending on the model.
Basic Touchpad Functions Moving the cursor on the screen Double-Click Function Place your finger on the touchpad slightly and move your finger. The mouse cursor will move accordingly. Move your finger in the direction you wish to move the cursor. Put your finger on the touchpad and quickly tap twice with your finger on an item you want. Alternatively, press the left touchpad button twice quickly.
Drag Function Dragging refers to moving an item to another place after selecting it. Press and hold down the left touchpad button over an item you want to drag and move the item to the new location. Move Holding down the left touchpad button 56 Bremen_R530_V7_eng.
The Gesture Function of the Touchpad (Optional) The Touchpad Gesture function may not be provided and the version of the function may differ depending on the model. Some usage procedures may differ depending on the version. For detailed usage procedures, refer to the description in the Touchpad Settings window. The images in this document may differ from the actual screen images and a different Touchpad may be provided depending on the model.
The Scroll Function Rotation function This function is the same as the scroll area of the Touchpad. If you place two fingers over the Touchpad and move them up, down, left or right, the screen is scrolled up, down, left or right. Place two fingers over the touchpad and move the fingers as follows to rotate the photo or image. or or Move function You can move to the previous or next page when you are looking at a photo or surfing the Internet.
Touchpad On/Off Function If you want to use the mouse only without using the touchpad, you can turn the touchpad off. To lock the touchpad function, press the Fn + keys. You can set the touchpad and touchpad button settings in the tabs that appear when clicking Start > Control Panel > Hardware and Sound > Mouse. 59 Bremen_R530_V7_eng.
CD Drive (ODD, Optional) An optical disk drive is optional and may differ depending on your computer model. For detailed specifications, refer to the catalogue. Do not insert a cracked or scratched CD. Otherwise, the CD may break and damage the optical disk drive when the CD rotates at a high speed. When you clean a CD or DVD title, wipe with a soft cloth from inside to outside. Insert a Mini CD into the center of the CD drive. The figures used for the description are of a representative model.
Multi Card Slot (Optional) Using the multi card slot, you can read and write data to a SD card, SDHC card, MMC card. You can use a card as a removable disk and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc.. Before You Start! You have to additionally purchase a multi card with the necessary capacity depending on your requirements. You can use a multi card just like any data storage device. A copyright protection function is not supported.
2 3 The card drive appears. Click Open folder and view files. If the window does not appear, click Start > Computer. You can save, move and delete data by doubleclicking the corresponding drive. The device name of the card drive may differ depending on your computer model. You can only use the card after formatting it. Using a Mini SD and RS-MMC Since the above cards are too small, you cannot insert the cards into the slot directly.
To remove a memory card To use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. Take hold of the end of the card and remove the card. When you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device.
ExpressCard Slot (Optional) You can use Express cards using this slot. The ExpressCard slot can be regarded as the next generation PCMCIA card specification and supports LAN, TV Tuner and Sound cards. This computer’s slot supports the Express Card/34 specification. Before You Start! Remove the dummy card installed to protect the slot first. Lightly push the dummy card of the slot. The dummy card pops up. Eject the dummy card. This slot is a ExpressCard slot. You cannot connect a PCMCIA card here.
Connecting a monitor / TV Using an external display device is useful when you are giving a presentation or watching a video or movie through your monitor. Before You Start! You have to buy a connection cable additionally. The figures used for the description are of a representative model. Therefore the figures may differ from the real ones. Due to restrictions of the operating system the DualView function is not supported for Windows 7 Starter.
Connecting to the HDMI port (Optional) Connect the computer to the HDMI port of the monitor or TV using a HDMI cable. When connecting the computer to a TV, switch the external input mode of the TV to ‘HDMI’. When a TV provides more than one HDMI port, connect the computer to the “DVI IN” port. 66 Bremen_R530_V7_eng.
Viewing Through a Monitor / TV You can switch the display device using the shortcut key. Switching the Display Device using the Shortcut Key LCD: Notebook Screen CRT: External Monitor Screen HDMI : TV Screen or Monitor (when it is connected via the HDMI port). Press the Fn + key combination once. Then the Easy Display Manager screen appears in which you can select a display device.
3 Setting up HDMI TV video (Optional) If the Desktop screen displayed on the TV does not fit to the TV screen, configure it as follows depending on the graphics card. Resize the Desktop using the resize bars so that the four arrows at the corners of the Desktop are placed in the corners of the TV and then click OK. You can view the graphics card type by selecting Device Manager > Display adapters and then clicking the symbol.
► [Type B Model] For Intel graphics cards Either type A or B is provided depending on the model. ► [Type A Model] 1 2 Right-click over the Desktop and select Graphics Properties. 3 Fit the Desktop to the TV screen by sliding the Horizontal and Vertical Resize Bars and click OK. 1 Right-click over the Desktop and select Graphics Properties. 2 Click Display > General Settings and select Customize Aspect Ratio from Scaling item.
4 For ATI graphics cards 1 Right-click over the Desktop and select ATI Catalyst Control Center > Advanced and click Next. 2 In the Graphics window, select Graphics > Desktops & Displays. 3 Right-click over a display device to be configured at the bottom of the Graphics window and select Configure…. In the Scaling Options tab, adjust the screen size to the TV screen size using the slide bar and click OK. 70 Bremen_R530_V7_eng.
2 Setting up HDMI TV audio (Optional) You can configure the sound of the computer to be played through the HDMI TV. You have to configure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV. If the default Playback Device is set to Speakers, change it to Digital Output Device(HDMI) (or HDMI Device), click Set Default and then click OK. The screen images and terms may differ from actual product depending on the computer model.
Using Dual View Dual View enables users to expand their computer screen over two display devices. Dual View is convenient when a wide operating space is needed. In addition, since Dual View operates as if there are 2 graphic cards present even when there is only one, you can set the resolution and color for each display device.
3 Canceling Dual View When notebook LCD is set as the main device, the 1 digit is displayed over it and the 2 digit is displayed over the auxiliary display device. Now you can expand the Desktop screen over 2 display devices. When using Dual View, it is recommended setting the LCD as the main device (number 1).
Adjusting the Volume You can adjust the volume using the keyboard and the volume control program. Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions.
3 4 3 Check if the microphone is set as the default recording device. If this is the case, it is already set as the default device. If not, right-click over the microphone and select Set default. Select the SoundAlive tab and select one of the modes. ▶ Basic Mode Click Start > All Programs > Accessories > Sound Recorder and click Start recording to start a recording. Music Select this mode to listen to music. Movie Select this mode to watch a movie.
Wired Network A wired network is a network environment used for a company network or broadband internet connection at home. Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions. The figures used for the description are of a representative model.
4 5 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. When not using DHCP, ask your network administrator for the IP address. The Network Component name may differ depending on the Operating System Installed.
4 Using both DHCP and a fixed IP simultaneously Select the Alternate Configuration tab, select User configured, fill in the corresponding fields and click the OK button. Using the Alternate Configuration, you can set both automatic and fixed IP addresses and then you can select to use either of them to connect to the Internet. 1 ▶ For Windows 7 Click Start > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane.
Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. Before You Start! The descriptions below are for computer models with a Wireless LAN card or device. A Wireless LAN device is optional. The pictures in this manual may differ from the actual product depending on your wireless LAN device model.
2 Click Connect. If a network key is set for the AP, enter the network key and then click Connect. ▶ For Windows Vista 1 Right-click over the Network Connections icon on the taskbar and click Connect to the Network. 2 Select an AP to connect to and click Connect. If there is a configured network key for the AP to connect to, the Enter Network Key window appears. Enter the network key in the window and then click the Connect button. For the network key, please ask your network administrator.
3 When Connected to the AP is displayed, click the Close button. You can access the network. Checking the network connection status Move the mouse pointer over the Wireless Network Connection icon on the taskbar, and the connection status is displayed. (For Windows Vista, ) Windows 7 Windows Vista 81 Bremen_R530_V7_eng.
Chapter 3. Settings and Upgrade LCD Brightness Control 83 BIOS Setup 84 Entering the BIOS Setup The BIOS Setup Screen 8 85 Setting a Boot Password 87 Changing the Boot Priority 89 Upgrading Memory 90 Battery 92 Installing/Removing the Battery Charging the Battery Measuring the Remaining Battery Charge Extending the Battery Usage Time Using the Security Lock Port Bremen_R530_V7_eng.
LCD Brightness Control You can adjust the LCD brightness in 8 levels. Before You Start! The screen brightness is automatically set to the brightest level (brightness level 8) when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time. 83 84 84 85 87 89 Controlling the Brightness Using the Keyboard Adjust the LCD brightness by pressing the Fn + key or the Fn + key.
BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. Before You Start! Use the BIOS setup to define a boot password, change the booting priority, or add a new device. Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. The functions of the BIOS setup are subject to change for product function enhancement purposes. The BIOS Setup menus and items may differ depending on your computer model.
The BIOS Setup Screen Either type A or B is provided depending on the model. ► [Type A Model] ► [Type B Model] XXXXXXXX Aptio Setup Utility - Copyright (C) 2009 xxxx Setup Menu Help Help for the selected item appears automatically.
System Setup Keys In the Setup, you have to use the keyboard. F1 Press to view the Setup Help. Up & Down Keys Press to move up and down. F5/F6 F9 ESC Left & Right Keys Enter F10 Press to change the item value. Press to load the default Setup settings. Press to return to a higher level menu or to move to the Exit menu. Press to move to another menu. Press to select an item or to enter a sub menu. Press to save the changes and exit Setup. The keyboard image may differ from the actual keyboard.
Setting a Boot Password When setting a password, you have to enter a password to use the computer or enter the BIOS Setup. By configuring a password, you can restrict system access to authorized users only and protect data and files saved on the computer. Before You Start! Do not lose or forget your password. If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.
Setting a User Password Changing the hard disk drive password For security purposes, you can only change a hard disk drive password after restarting the computer by pressing the computer Power button. Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can prevent other users from entering Setup. Before configuring a user password, a supervisor password must have been configured. Deactivating the supervisor password also deactivates the user password.
Changing the Boot Priority By default, the highest boot priority device is set to the CD-ROM/DVD drive. As an example, the procedures to change the highest boot priority device to the hard disk drive are described below. 1 Select the Boot menu in the BIOS Setup. 2 Press on the Boot Device Priority item. 3 XXXXXXXX Press the down key (↓) to move to the AHCI HDD itemand press the F6 key to move up to the top item. ► [Type A Model] Boot Device Priority [Boot priority order] 1. AHCI CD : N/A 2.
Upgrading Memory One or more memory modules are installed on the computer. There are 2 memory slots and users can replace the installed memory or add new memory. Before You Start! Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the computer is in Sleep mode. Disconnect main power plug and remove the battery before continuing.
3 4 Push the memory module down so that it is completely fixed. If the memory does not fit easily, push the memory module down while pulling the memory module latches outward. Close the memory compartment cover and fasten the screw. Removing a memory module Pull the memory module latches outward. The memory module will pop up. Remove the memory module out at an angle of 30 degrees. 91 Bremen_R530_V7_eng.
Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. A Lithium-Ion smart battery is supplied with this computer. Before You Start! Carefully read and follow the precautions printed on the battery before using the battery. Before using your computer for the first time after purchasing it, charge the battery completely. Precautions Use only chargers specified in the User Manual.
Charging the Battery 3 To install the battery again, slide the battery into the system. The battery latches move inwards and fix the battery automatically. 1 Attach the battery and connect the AC adapter to the DC-in jack of the computer. The battery will then start charging. 2 When charging is complete, the Charge LED turns green. Status Charge LED Charging Red Charging complete Green AC adapter not connected Off Check if the battery latch has been moved inwards. 93 Bremen_R530_V7_eng.
Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. To use the shortcut key to view Battery Usage Time Information Press the Fn + keys on the keyboard. The remaining battery charge (%) will displayed for a moment. You can only view the charge status in this way when Easy Display Manager is installed on your computer. A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened.
Extending the Battery Usage Time Decreasing the LCD Brightness Press the Fn + keys on the keyboard to decrease the LCD brightness to extend the battery usage time. XXXXXXXX 3 Move to the Boot > Smart Battery Calibration item using the direction keys and press . 4 Highlight Yes in the Battery Calibration Confirmation window and press . The Battery Calibration function is activated and the battery is forcefully discharged. To stop the operation, press the button.
Using the Security Lock Port You can connect a Kensington lock to the Security Lock port to prevent your computer from being stolen when you have to use the computer in a public place. To use this feature, you have to purchase the Kensington lock additionally. To use the Kensington lock, refer to the product manual. Tie the Kensington lock cable to a fixed object and install the other end of the cable to the Security Lock port. 96 Bremen_R530_V7_eng.
Chapter 4. Troubleshooting Using Samsung Recovery Solution (Optional) Samsung Recovery Solution Functions Restore Function Backup Function System Software Function 98 101 10 108 Reinstalling Windows 7/Vista (For Windows 7 and Windows Vista. For supported models only) 110 Q&A 114 Windows Related Display Related Sound Related Wired Network (LAN) Related Wireless Network (WLAN) Related Game and Program Related Bluetooth (Optional) Bremen_R530_V7_eng.
Using Samsung Recovery Solution (Optional) Samsung Recovery Solution is a program that can backup your hard disk and restores it later when a problem occurs with your computer. It also provides a System Software function that enables you to install or backup device drivers and system software programs needed for your system to function properly. Before You Start! Samsung Recovery Solution may not be provided or the version may differ depending on the model.
Restore Function Using this function, you can easily restore your computer to a previous, stable state when your computer no longer works properly or you are unable to boot up your computer due to some problem. If you have backed up data, you can restore the backup data. Restore Functions Basic Restore This function quickly restores major Windows files (C:\ Windows) without touching the user configuration and data on the C drive.
System Software function You can back up the System Software saved on the hard disk to another hard disk drive or DVD, and reinstall part or all software programs to your computer. System Software function System Software Installation System Software Backup This function installs the system software programs needed for your computer This function backs up all System Software Programs The system software function is supported by Samsung Recovery Solution version 4 or later.
Restore Function Not only can you use Samsung Recovery Solution when Windows is running, but also when you are unable to boot up into Windows. Let’s learn how to use Samsung Recovery Solution. Optional functions such as Initial State Image, Initial Status Backup, and Partitioning are only available in some models. Partition Setup & Initial Status Backup If you turn your computer on for the first time, the Initial Status Backup function is performed after registering Windows.
2 Restoring the computer Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user-saved point. The Restore function provides the Basic Restore and Complete Restore options. 1 If the initial menu screen appears, click Restore. – When Windows is running: Click Start > All Programs > Samsung > Samsung Recovery Solution > Samsung Recovery Solution.
3-1 If you have selected Basic Restore: In the Basic Restore screen, click the Next button. The system will be restarted. 3-2 If you have selected Complete Restore: In the restoration point selection screen, select the restoration point described as ‘Computer Initial Status’ and click the Next button. The system will be restarted. 5 The computer boots up into restoration mode and the restoration progress message appears. If you click OK, the restoration begins.
4 Backup Function Complete Backup/Restore Enter a description for the backup regarding the current computer status in the Description field so that you can easily recognize it later, and specify the Save Path. If your computer has a DVD-Writer, you can specify the DVD drive as the Save Path. A Complete Backup saves the complete image of the C drive onto another drive or DVD. A Complete Restore restores the image file saved by the Complete Backup onto the C drive.
6 7 2 The Complete Backup begins. If multiple DVDs are required, the expected number of DVDs is displayed in the progress screen. Whenever burning a DVD is completed, the “Insert the next DVD” message will appear. Continue the backup according to the instructions. Click Start > All Programs > Samsung > Samsung Recovery Solution > Samsung Recovery Solution. When you cannot start Windows, turn the computer on and press the F4 key in the boot screen to enter restoration mode.
6 4 When the ‘Restart the System’ message appears after the restoration is complete, click OK to restart the system. The Complete Restore has been completed. Enter a description for the backup in the Description field so that you can easily recognize it later and specify the Save Path. If your computer has a DVDWriter, you can specify the DVD drive as the Save Path. Data Backup/Restore Data Backup enables you to save specific files or folders onto another drive or DVD.
Data Restore 1 4 Select a backup item to be restored in the backup list and click the Next button. 5 Select a folder for the restoration and click the Next button. Data Restore begins. 6 When Data Restore is completed, check if the data has been restored to the specified folder. – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. – When backing up to another drive Proceed to Step 2.
System Software Function Using System Software The System Software function is a function that enables you to reinstall device drivers and System Software Programs or back up those programs. 2 When the initial menu screen appears, click System Software > System Software Installation. 3 When the Samsung System Software screen appears, check all the device drivers and application programs you want to install and then click Install Now. 4 After the installation is complete, the computer will restart.
System Software Backup 1 Click Start > All Programs > Samsung > Samsung Recovery Solution > Samsung Recovery Solution. 2 When the initial menu screen appears, click System Software > System Software Backup. 3 Specify the Save Path. If your computer has a DVDWriter, you can specify the DVD drive as the Save Path. 4 If you click the Next button, the Software Backup begins. If you have selected the DVD drive as the Save Path, the “Insert a blank DVD” message appears.
Reinstalling Windows 7/Vista (For Windows 7 and Windows Vista. For supported models only) You can reinstall Windows using the SYSTEM RECOVERY MEDIA for Windows when Windows is no longer working properly. (For models supplied with a SYSTEM RECOVERY MEDIA.) For models supplied with the Samsung Recovery Solution, you can reinstall Windows using the Samsung Recovery Solution. These descriptions are for Windows 7 and Windows Vista and for supported models only.
3 If the Select Windows Installation window appears, click Install Now. When the Select Update window appears, click on the relevant item. If you select Go online to get the latest updates for installation in the Select Update window, the latest updates are installed and Step 4 follows. At this time, the computer must be connected to the Internet. For Windows 7/Vista, the screen asking for the operating system to be installed may appear depending on the version.
For Windows 7/Vista, this screen may not appear depending on the version. 7 The Windows installation continues. The computer will restart 3 times during the installation. If the Press any key to boot from CD or DVD... message appears after a restart, do not press any button. 8 Register a user according to the instructions on the Windows screen. 9 When the registration is complete, the Windows Desktop screen appears. Custom Select this option to Reinstall Windows.
5 Reinstalling when Windows does not start When Windows does not start, boot up with the SYSTEM RECOVERY MEDIA and from there you can reinstall Windows. 1 Insert the SYSTEM RECOVERY MEDIA into the DVD drive and restart the computer. 2 If the Press any key to boot from CD or DVD... message appears while booting, press any key on the keyboard. For Windows Vista, this screen may not appear depending on the version. 6 After a while, the Options windows such as Language, Time, Keyboard, etc. appear.
Q&A This section provides information on possible problems, solutions and other references for using the system. Since these descriptions are written on the basis of the latest operating system, Windows 7, some of the content and the figures of the descriptions may differ depending on the operating system. Since the procedures for other Windows operating systems are similar, use the computer referring to these descriptions. The path may differ depending on the operating system.
Q The Windows Firewall setting according to the network location (for the Windows 7 operating system only) ▶ Requirements for Running Virtual XP z Virtual XP is only available on these three operating systems: Windows 7 Professional, Ultimate, and Enterprise. A Windows 7 allows different Windows firewall settings for each network location. x The memory must be 2 GB or more and the virtualization function of the BIOS must exist and be activated by the CPU.
Display Related Q Q The LCD screen is too dark or too bright. A Turn the LCD backlight on or adjust the LCD brightness. Press Fn + press Fn + brightness. Q A Press the Fn + to turn the LCD backlight on or or Fn + to adjust the LCD keys again. If the problem continues even after pressing the key combination, this is because the current resolution is too high and is not supported by the projector. In this case, change the resolution to 1024x768 pixels.
Q Q The shortcut icons are not displayed on the screen even if I press the shortcut key. A The shortcut icons only appear when the Easy Display Manager program is installed. Q I cannot configure the Image Sharpness in the NVIDIA Control Panel of [NVIDIA Graphics]. A The NVIDIA Control Panel >Adjust desktop Color Settings > Image Sharpening item is set to None and will not be configurable. This is normal. This function is only available for old graphic chipsets.
Sound Related Q Q How can I configure the sound for video or audio chatting? A Configuring the Realtek HD Audio Manager z Select Control Panel > Realtek HD Audio Manager. A This occurs because the algorithm used to remove the echo sound regards some of the sound as an echo and removes this, as the recording is done by playing the sound from the external microphone. x Select the Mic tab. c Select the Noise Suppression and the Acoustic Echo Cancellation items and click the OK button.
Wired Network (LAN) Related Q — The function A is a function that activates the system from Sleep mode when a signal (such as a ping or magic packet command) arrives over the network (wired LAN). Connecting a wired LAN while using a wireless LAN may not activate the function. Set the Wireless LAN to Disable to use the function. For Windows 7, Wake On LAN is not supported by Ping.
Q The Home Group function (for the Windows 7 operating system only) A Home Group is a function that enables connecting all the computers at home allowing users to access the data on all computers as if accessing the data on the local computer. If you set the first computer to use a Home Group as a Home Network, you can create a Home Group. A second (and more) computer can participate in the created Home Group. A password is required for participation and you can confirm the password on the first computer.
Wireless Network (WLAN) Related Q Q I cannot find an AP. Even if the signal strength is excellent, the network connection may not operate properly if the TCP/IP properties are not properly configured, or the network key (encryption key) is incorrect. A Verify whether the Wireless LAN LED is on. If it is turned off, turn it on by pressing the Wireless LAN On/Off button (Fn + ). Q The signal strength is excellent, but I cannot connect to the network.
Q Check the AP Settings I cannot connect to the AP. For the AP settings, refer to the User Guide provided by the AP manufacturer. Check the Computer Settings A3 Verify whether the environment is suitable for using a wireless LAN. The use of a wireless LAN may be restricted according to the environment and distance. Obstacles such as walls or doors affect the use of a wireless LAN. Install the AP in a high and open space, 50cm from the wall and far removed from any other radio signal sources.
Q When several APs are present simultaneously, check the channel settings for each AP. When different APs are using nearby channels, interference may occur between the electronic waves. Set the AP channels further apart from each other. (Ex: Ch1, Ch5, Ch9, Ch13) I cannot connect to a computer connected to the Ad-Hoc network. A1 Check the security settings and network name of the wireless Ad-Hoc network. A2 Check the TCP/IP settings of the computers connected to the wireless Ad-Hoc network.
Q Q During the wireless Ad-Hoc network operation, the AP (Access Point) is intermittently not found. A This problem occurs intermittently during the wireless Ad-Hoc network operation. Even if this problem occurs, the wireless Ad-Hoc network operation is working properly and is not affected. Click Refresh to update the AP list. Q The wireless LAN does not work properly when there is a device operating on an adjacent frequency in the vicinity of the product.
Game and Program Related Windows may not provide some functions properly when performing some applications especially games, or may cause a problem due to a device driver compatibility issue. For the latest device drivers and bug fixes, please refer to the respective company’s website. Q Q A 3D game does not work, or some functions are not working. A Change the graphics settings of the game to ‘2D’ or ‘Software Renderer’, then run the program again.
Bluetooth (Optional) Q Usage Instructions How to view the Bluetooth help information. Generally, Bluetooth devices deliever stable performance while connected within a 3m(10 ft.) distance. A Press the Windows + F1 key combination to launch Windows Help and search for Bluetooth related items in the Help section. Q For Bluetooth to operate smoothly, use the computer in an open environment with no walls or obstacles in the way and having low radio interference.
Chapter 5. Appendix Bremen_R530_V7_eng.
Product Specifications The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. CPU (Optional) Intel Celeron/Pentium / Core2 Duo/Core2 Quad Processor Main Memory (Optional) Memory type: DDR2 SODIMM DDR3 SODIMM Main Chipset (Optional) Intel GL40/GM45/PM45/PM55/HM55 Hard Disk Drive (Optional) 9.
Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. Intel, Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. All other product or company names mentioned herein are registered trademarks of their respective companies. ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Glossary The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. Direct X An application interface developed to enable Windows application programs to access hardware devices at a very high speed.
Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. LCD (Liquid Crystal Display) There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye strain.
Quick Launch This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click. You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon. USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.
Index B Battery Battery Calibration BIOS Setup Booting Priority L 93 96 85 90 C CD Drive / Recording Charge Click Connect / Output Monitor 60 94 55 65 D Dual View 72 E ExpressCard Slot 64 T LCD Brightness 84 M Touchpad 54 V Memory Multi Card Slot 91 61 Volume Control 74 W P Password Product Name Product Specifications 88 41 129 Wired Network Wireless Network 77 80 R Recorder Remaining Battery Charge 74 95 S Safety Precautions Security Lock Port Shortcut Keys Status Indicators
